Advertisement

Summer Infant Video Monitor Manual

Moonlite® HD night vision boost
Digital zoom, 6 levels
SleepZone® virtual boundary box
Remote camera steering
Digital privacy
Talk-back to baby & temp display
Lullabies/white noise & clock
Up to 250m range
VOX voice-activated screen wake-up

Keep this instruction manual for future reference. Please read the following instructions and warnings carefully.

SETTING UP THE CAMERA & HANDHELD SCREEN

Charge the Handheld

Charge for 7 hours before first use. After the initial charge, recharge when necessary for 7 hours. We recommend charging overnight.
Charge the Handheld

NOTE: While powered off, you will not see an indicator that the handheld is charging. LED will light up for 5 seconds to let you know it is charging, then shut off.

Install the Nursery Camera

NOTE: For best picture focus, place camera 0.9m from cot.

  1. Plug in nursery camera.
  2. Place camera on a flat surface, such as a dresser or shelf.
    Install the Nursery Camera Step 1
  3. Or, mount the camera on a wall using the screw and wall anchor provided.
    Install the Nursery Camera Step 2

Tools required for wall mount: Screwdriver and drill (not included).

Secure the Camera Cord

NEVER place the camera or cords within 0.9m of the cot. Secure the cord to your wall using the 6 security clips included to keep the cord away from baby's reach.
Secure the Camera Cord

Read all warnings prior to using this product.


STRANGULATION HAZARD
Children have strangled in cords. Keep this cord out of the reach of children (more than 0.9m away in all directions).

Power on the Nursery Camera & Parent Handheld

  1. Press and hold the camera POWER button for 3 seconds.
    A small green indicator light will appear above the lens.
    Power on the Nursery Camera & Parent Handheld Step 1
  2. Press and hold the handheld POWER button for 3 seconds.
    The handheld will automatically pair with the camera.
    Power on the Nursery Camera & Parent Handheld Step 2

NOTE: The handheld unit and the camera are paired at the factory for privacy reasons. (If the handheld and camera are not paired with each other for any reason, see "Adding a Camera" section.)

Congratulations! You are now ready to use your Baby Pixel® Zoom HD™ Digital Color Video Monitor!

GETTING TO KNOW YOUR HANDHELD

Screen Icons

Screen Icons

Time
Lullabies & White Noise
VOX
Zoom (6 levels)
Temperature
Camera Selection
Reception
Battery Life/Plugged In

Function Buttons

Function Buttons

SleepZone®
Power/Video
Moonlite®
Zoom
Volume
Menu/Select
Up/Down/Left/Right
Talk-Back

Press the MENU/SELECT button to access the menu options.
Use the LEFT/RIGHT ARROW buttons to highlight the Menu items.
Press MENU/SELECT to confir m a selection.
To exit menu, tap the power button once. Menu also exits after 8 seconds of inactivity.
Menu Options Step 1

VOX Menu
SleepZone® Menu 20
Camera Menu
Settings Menu
Lullabies/White Noise Menu

Flip out the kick-stand and place the monitor on a stable, level surface.
Menu Options Step 2

ADJUSTING THE HANDHELD SETTINGS

Improve Reception

Flip up antenna to improve reception.
Improve Reception

Handheld Screen Brightness

  1. Press MENU/SELECT button.
  2. Press the RIGHT ARROW button to highlight the Settings icon.
  3. Press MENU/SELECT.
    Handheld Screen Brightness Step 1
  4. Press the RIGHT ARROW button to highlight the brightness icon.
  5. Press MENU/SELECT.
    Handheld Screen Brightness Step 2
  6. Press the RIGHT/LEFT ARROW buttons to adjust the screen brightness.
  7. Press MENU/SELECT to confirm.
    Handheld Screen Brightness Step 3

Volume

Press VOLUME button to increase/decrease sound level.
Volume

Temperature Display

  1. Press MENU/SELECT.
  2. Press the RIGHT ARROW button and highlight the Settings icon.
  3. Press MENU/SELECT.
    Temperature Display Step 1
  4. Press the RIGHT ARROW button to highlight the Temperature icon.
  5. Press MENU/SELECT.
    Temperature Display Step 2
  6. Press the LEFT/RIGHT ARROW button to select ºF or ºC.
  7. Press MENU/SELECT to confirm and exit temperature settings.
    Temperature Display Step 3

Clock

  1. Press MENU/SELECT.
  2. Press the RIGHT ARROW button to highlight the Settings icon.
  3. Press MENU/SELECT.
    Clock Step 1
  4. Press the RIGHT ARROW button and highlight the Clock icon.
  5. Press MENU/SELECT.
    Clock Step 2
  6. Use the LEFT/RIGHT/UP/DOWN ARROW buttons to adjust time.
  7. Press MENU/SELECT to confirm.
    Clock Step 3

VIEWING YOUR BABY

Remote Camera Steering

Remotely control the camera angle from the handheld. Use the UP/DOWN/LEFT/RIGHT ARROW buttons to move the camera angle up, down, and side to side.
Remote Camera Steering

Digital Zoom

  1. Press the ZOOM button to zoom in.
    • A zoom icon will appear briefly in the screen's bottom right corner.
    • The zoom icon will appear at the top of the screen.
    • There are 6 levels of zoom.
      Digital Zoom

SleepZone® Virtual Boundary Box

The SleepZone® feature creates a virtual boundary box within your screen. This feature alerts you with a sound on your handheld if baby crosses the virtual boundary or an object enters the boundary area you've set.

  1. To activate, press the SleepZone® button (automatically set to a default area).
    SleepZone® Virtual Boundary Box Step 1
  2. To adjust the baby boundary area, press and hold the SleepZone® button for 3 seconds.
    SleepZone® Virtual Boundary Box Step 2
    • Adjust the camera view with the UP/DOWN/LEFT/RIGHT ARROW buttons.
    • Use the ZOOM button to bring the image closer.
    • Press MENU/SELECT to confirm.
      SleepZone® Virtual Boundary Box Step 3
    • Adjust the size of the SleepZone® with the LEFT/RIGHT ARROW buttons.
    • There are two box size options to choose from.
      SleepZone® Virtual Boundary Box Step 4
    • Adjust the Baby Boundary ALARM volume with the UP/DOWN ARROW buttons.
    • Press MENU/SELECT to confirm.
      SleepZone® Virtual Boundary Box Step 5
      NOTE: All buttons except for SleepZone®, POWER, and MENU/SELECT will become inactive.
    • To shut off SleepZone®, press the SleepZone® or MENU/SELECT button.
    • SleepZone® can only be used on one camera at a time.

You can also access SleepZone® feature through the MENU.

  1. Press MENU/SELECT button to enter the menu screen.
  2. Press the RIGHT ARROW button to highlight SleepZone® and press MENU/SELECT button to confirm.
    SleepZone® Virtual Boundary Box Step 6

To extend battery life, we recommend plugging in your handheld while using the SleepZone® feature.

Video On/Off Power Save Mode

This feature helps conserve battery life by automatically turning off the screen when the handheld is not plugged into an A/C adapter (after 2 minutes, or 30 seconds if VOX or SleepZone® is on).

  1. To turn VIDEO OFF and conserve battery power, press the POWER/VIDEO button.
    Video On/Off Power Save Mode Step 1
    • The screen will go dark.
    • The audio feature will remain activated, allowing you to monitor sounds.
    • If VOX feature is on, video will turn on automatically when sound is detected.
  2. To turn VIDEO ON, press the POWER/VIDEO button.
    Video On/Off Power Save Mode Step 2

HEARING & SOOTHING YOUR BABY

Sound-Activated Lights

The LED light bar on the side of the handheld will light up as it picks up noises, even in power save mode.
(When the battery is low, the first LED flashes red and the handheld beeps.)
Sound-Activated Lights

Talk-back to Baby

Reassure and soothe baby with the sound of your voice and the press of a button.

  1. Press and hold the TALK-BACK button to talk to your baby.
    The talk-back icon will appear briefly in the screen's bottom right corner.
  2. Release the button to end talk-back mode.
    Talk-back to Baby

Voice-Activated Screen Wake-up (VOX)

The VOX feature, when on, will turn on your screen when it is in power save mode and the camera picks up a sound.

  1. Press the MENU/SELECT button to enter menu screen.
  2. Use the LEFT ARROW button to highlight the VOX icon and press MENU/SELECT.
    Voice-Activated Screen Wake-up (VOX) Step 1
  3. Press the LEFT/RIGHT ARROW buttons to highlight VOX on or VOX off .
  4. Press MENU/SELECT to confirm.
    The VOX icon will appear at the top of the screen.
    Voice-Activated Screen Wake-up (VOX) Step 2

NOTE: When VOX feature is on, VOX is temporarily suspended when lullabies/white noise are in use. VOX reactivates when lullabies/white noise turn off.

Lullabies and White Noise

  1. Press the MENU/SELECT button to enter the menu screen.
  2. Press the RIGHT ARROW button to highlight Lullabies and White Noise icon.
  3. Press MENU/SELECT.
    Lullabies and White Noise Step 1
  4. Press the LEFT/RIGHT ARROW buttons to select a different lullaby or white noise. Press MENU/SELECT.
    Lullabies and White Noise Step 2
    • A lullaby/white noise will play.
      The lullaby icon will appear at the top of the screen.
      Once you choose the lullaby or white noise sound that you like, this will remain the active sound until you make a different selection.
    • Lullabies/white noise can be turned on and off by pressing the button on the back of the camera.
      Lullabies and White Noise Step 3

NOTE: Lullabies/white noise will turn off automatically after 20 minutes.

Lullabies/white noise can also be turned off through the lullabies/white noise menu.

  1. Navigate to the lullabies/white noise menu.
  2. Press the RIGHT ARROW button to select the No Sound icon.
  3. Press the MENU button.
    Lullabies and White Noise Step 4

Moonlite® Night Vision Boost

The Moonlite® Night Vision Boost feature helps provide better viewing of your baby, temporaril y, when the room is dark.

  1. Press and hold the MOONLITE® button to illuminate a small LED light on the camera.
    • A MOONLITE® icon will appear in the lower right-hand corner of the screen while button is pressed.
    • When you release the button, the camera will return to normal black & white night vision.
    • Depending on how far you have placed the camera from the cot, you can optionally adjust the MOONLITE® brightness.
    • Moonlite® will automatically turn off after seven seconds.
      Moonlite® Night Vision Boost

Moonlite® Brightness Adjustment

  1. Press the MENU button.
  2. Press the RIGHT ARROW button to highlight the Settings icon.
  3. Press MENU/SELECT.
    Moonlite® Brightness Adjustment Step 1
  4. Press the RIGHT ARROW button to highlight the Moonlite® icon and press MENU/SELECT.
    Moonlite® Brightness Adjustment Step 2
  5. Press the LEFT/RIGHT ARROW buttons to adjust Moonlite® brightness.
  6. Press the MENU/SELECT button to exit.
    Moonlite® Brightness Adjustment Step 3


Do not stare directly at Moonlite® LED for prolonged periods of time.

ADDING AND VIEWING CAMERAS

Camera Options Menu

  1. Press the MENU/SELECT button.
    By default, Camera Options will be highlighted in the menu navigation bar.
    Camera Options Menu Step 1
  2. Press MENU/SELECT to confirm.
    Four Camera Option Icons will appear in the Menu Bar.
    Camera Options Menu Step 2

View Cam
Scan
Add Cam
Delete Cam

Note: If only one camera is synced to the handheld, VIEW CAM and SCAN will be grayed out and not available.

Adding a Camera

Your digital video monitor accepts up to 4 cameras total. Select the one you want to view, or use auto-scan mode to cycle through each camera on a 8-second rotation.

  1. Plug in camera. A small solid green light above the lens will indicate power.
    If not, press and hold the POWER button for 3 seconds until the green light appears.
  2. Enter pairing mode by pressing the camera power button until it beeps and small green light flashes (about 8 seconds).
  3. On the handheld, press MENU/SELECT twice to open the Camera Options Menu.
  4. Press the RIGHT ARROW button to highlight the Add Camera icon.
  5. Press MENU/SELECT.
    Adding a Camera Step 1
  6. Press the LEFT/RIGHT ARROW buttons to highlight the desired camera.
    Icons for Synced Cameras:
    • Blue icons indicate synced cameras.
    • Gray icons indicate cameras not yet synced.
    • A blue ring indicates selected camera.
  7. Press MENU/SELECT.
    Adding a Camera Step 2
    • A syncing icon will appear next to the corresponding camera number.
      Adding a Camera Step 3
    • If syncing is successful: video will appear from the newly added camera with a blue ring around the camera icon.
      Adding a Camera Step 4
    • If syncing is unsuccessful: an X will appear over the sync icon.
      Repeat steps from this section to sync, making sure the camera and handheld are next to each other.
      Adding a Camera Step 5

Deleting a Camera

  1. Press MENU/SELECT twice to enter the Camera Options Menu.
  2. Use the RIGHT ARROW button to highlight the Delete Camera icon.
  3. Press MENU/SELECT.
    Deleting a Camera Step 1
  4. Use the LEFT/RIGHT ARROW buttons to highlight the camera you want to delete.
  5. Press MENU/SELECT button to delete camera.
    The Camera icon will turn gray once disconnected.
    Deleting a Camera Step 2

Selecting a Camera

  1. Press MENU/SELECT twice to enter the Camera Options Menu.
  2. Use the RIGHT ARROW button to highlight the Select Camera icon.
  3. Press MENU/SELECT.
    Selecting a Camera Step 1
  4. Use the LEFT/RIGHT ARROW buttons to highlight the camera you want to select.
    Synced cameras appear in blue. Current viewing camera is outlined.
  5. Press MENU/SELECT.
    Selecting a Camera Step 2
    Video from the selected camera will appear on the screen.
    • The camera number (1-4) icon will briefly appear in the screen's lower right corner.
    • The camera number icon at the top of the screen will change to the selected camera.
      Selecting a Camera Step 3

NOTE: If using SleepZone®, it will deactivate when you select a different camera or use Scan Mode.

Scanning Cameras

Scan Mode cycles through each active camera every 8 seconds.

NOTE: Scan Mode is only available if more than one camera is synced with the handheld.

  1. Press MENU/SELECT twice to enter the Camera Options Menu.
  2. Use the RIGHT ARROW button to highlight the Scan Cameras icon.
  3. Press MENU/SELECT to confirm.
    Scanning Cameras Step 1
    The scan status bar will appear on the right side of the screen.
    • A red icon indicates cameras that have lost a signal.
      Scanning Cameras Step 2
    • Camera Number icon in the indicator bar changes to show which camera is currently being viewed.
    • Press any button to stop scanning.
      Scanning Cameras Step 3

TIPS & TROUBLESHOOTING

No picture or sound

  • Make sure the camera and handheld monitor unit are paired.
  • Make sure the camera and handheld monitor unit are turned on.
  • Make sure the AC adapters are plugged in.
  • Make sure the outlets are working.

Sound but no picture

  • Press the Video On-Off Button once to turn on video mode.
  • Make sure nothing is blocking the camera.
  • Test reception by moving the handheld unit and/or camera to different locations.
  • Make sure the camera and handheld monitor unit are paired.

Picture but no sound

  • Power the handheld completely off, then turn handheld back on.
  • Turn up the volume using Volume Control.

Picture not clear

  • Wipe camera lens with microfiber or clean, damp cloth.
  • Position the handheld unit closer to the camera.
  • Move the handheld unit away from other electronic devices, cordless phones, etc.
  • Adjust the brightness using the Brightness Control.
  • Test reception by moving the handheld unit and/or camera to different locations.
  • Place camera 1.8m to 2.4m from cot for optimized focus. Make sure to follow instructions and warnings for camera placement.

Squealing sound coming from speaker on Handheld Unit

  • Move the handheld unit and camera further away from each other.
  • Turn the volume down using Volume Control.
  • Power both the handheld and camera off completely. Remove and re-insert the handheld battery, then turn both back on.

Handheld is beeping

  • If no video, turn on camera.
  • Handheld beeps if SleepZone® alert is on or camera is out of range.
  • If battery is low, charge battery.
    After the initial charge, recharge when necessary for 7 hours. We recommend charging overnight.

Handheld battery does not last long per charge

  • Turn VOX and SleepZone® off.
  • If the handheld has not been used recently, the battery may need a couple charge/discharge cycles to regain full capacity.

Temperature listed as LL or HH

  • Room temperature is outside of the thermometer limits. The thermometer is effective in between 32°F – 100°F (0°C – 38°C).
    If you receive a false error message, please contact our Consumer Relations Team.

Camera isn't pairing with handheld

  • Delete camera and add it back.

SleepZone® frequent alerts

  • Adjust size of boundary box or zoom out so there is room for your child to move a little without setting off alerts.
  • Check for objects casting shadows into the SleepZone® boundary area.

SleepZone® not sounding alerts

  • Check to make sure that SleepZone® feature is activated and that motion is occurring across the boundary box.
  • Increase volume of SleepZone® alerts.

We're here to help!
If you have issues or questions not addressed in this Owner's Guide, contact us at +44(0) 144 250 5000 or custserviceuk@summerinfant.com
Do
not return the product to the store.

ORDERING REPLACEMENT PARTS

To order replacement parts or extra cameras, contact our Consumer Relations Team at +44(0) 144 250 5000 or email custserviceuk@summerinfant.com

  • Camera AC Adapter
  • Handheld AC Adapter
  • Extra Camera
  • (8) Rechargeable Ni-MH AAA size 1600mAh 4.8V batteries


THIS PRODUCT CANNOT REPLACE RESPONSIBLE ADULT SUPERVISION.

  • STRANGULATION HAZARD - Children have STRANGLED in cords. Keep this cord out of reach of children (more than 0.9 m away from the cot). Use enclosed Security Clips to help secure cord away from baby's reach. Never use extension cords with AC Adapters. Only use the AC Adapters provided.
  • When an AC Adapter is plugged into an electrical outlet, do not touch the exposed end.
  • Test monitor before first use, periodically, and when changing location of the Camera.
  • Do not use monitor near water (such as bathtub, sink, etc.).
  • Keep monitor away from heat sources (such as stoves, radiators, etc.).
  • Make sure there is proper ventilation around all monitor components. Do not place on sofas, cushions, beds, etc. which may block ventilation.
  • This product is not a toy. Do not allow children to play with it.
  • This product contains small parts. Adult assembly required. Exercise care when unpacking and assembling the product.

warningBATTERY WARNING

  • Use only the original rechargeable battery provided. If you need a replacement, please contact Summer Infant Europe using the contact details below.
  • Do not short-circuit supply terminals.
  • Remove battery when product is stored for long periods of time or when battery is exhausted.
  • Dispose of exhausted battery properly.
  • Keep all batteries away from children.

CONTACT US

Summer Infant (USA), Inc.
1275 Park East Drive
Woonsocket, RI 02895
1-401-671-6551

Summer Infant Europe, Ltd.
First Floor, North Wing Focus 31,
Cleveland Road,
Hemel Hempstead,
HP2 7BW, UK
custserviceuk@summerinfant.com

© 2019 Summer Infant (USA), Inc.
Colours and styles may vary.
Please retain information for future reference.
Made in China. 02/19

Brand

Videos

Summer Infant Pixel Zoom HD baby monitor - Review Video & unboxing

Documents / Resources

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Summer Infant Video Monitor Manual

Advertisement

Need help?

Need help?

Do you have a question about the BABY PIXEL ZOOM HD and is the answer not in the manual?

Questions and answers

Table of Contents