Water level
When there is not enough water in the water tank, the
humidifier stops working, The humidifier will resume work when you refill water
into the water tank.
Note:
It is normal to find some water left in the tank.
•
Refilling water
Note:
When filling water, do not exceed the maximum water level, or water might leak
•
from the air inlets.
Do not shake the water tank when moving it, or water might leak from the air
•
inlets.
Do not fill water through the air outlets on top of the humidifier.
•
1
Switch off the humidifier and unplug it.
2
2
Remove the upper unit by holding it at both sides.
3
Fill the water tank with cold tap water until water reaches the maximum water
indication level.
4
Place the upper unit back onto the water tank.
3
indicator is on, the
4
EN
7