Getting Started; Prepare For Humidification; Using The Humidifier; Switch The Humidifier On And Off - Philips HU4811 User Manual

3 Getting started
Prepare for humidification
1
Hold by both sides of the upper unit and
lift it up (fig b).
2
Remove the packaging material of the new
humidification filter (fig c).
3
Assemble the new humidification filter
around the filter support (fig d).
4
Put the filter and the filter support back
into the water tank (fig e).
5
Fill the water tank with cold tap water until
water reaches the maximum water level
indication (fig f).
6
Place the upper unit back onto the water
tank (fig g).
4 Using the
humidifier
Switch the humidifier on and
off
1
Put the plug in the wall socket.
2
Turn the control knob to low speed
high speed (fig h).
» The speed light and the humidifier are
on (fig i).
3
Turn the control knob to OFF.
» The speed light is off.
» The humidifier is off.
Note
•
The humidifier releases very fine invisible mist,
so it is normal that you cannot see the mist.
Water level
When there is not enough water in the
water tank, the speed light will be off and the
humidifier stops working. The control knob stays
at the chosen speed.
When you refill water, the humidifier will
resume work at the chosen speed.
Note
•
It is normal to find some water left in the tank.
or
EN 5