Zanussi ZWS624B4S User Manual page 27

UNPACKING
1. Remove the external film. If necessary, use a
cutter.
2. Remove the cardboard top and the polystyrene
packaging materials.
3. Open the door. Remove all the items from the
drum.
4. Put the front polystyrene packaging element on
the floor behind the appliance. Carefully put
down the appliance onto its rear side.
5. Remove the polystyrene protection from the
bottom.
6. Put the appliance back into an upright position.
Remove the power supply cable and the drain
hose from the hose holder.
WARNING! It is possible to see
water flowing from the drain hose.
This is because the washing
machine has been tested at the
factory.
7. Remove the four transit bolts and pull out the
plastic spacers.
1
2
2
1
27