Supported Gpio Register; Gpio Registers; Gpio Example Program-1 - Advantech AIIS-1240 User Manual

B.1

Supported GPIO Register

Below are the detailed descriptions of the GPIO addresses and a programming sam-
ple.
B.2

GPIO Registers

Bank
09h
07h
07h
07h
B.3

GPIO Example Program-1

------------------------------------------------
Enter the extended function mode, interruptible double-write
------------------------------------------------
MOV DX,2EH
MOV AL,87H
OUT DX,AL
OUT DX,AL
---------------------------------------------------------------
Configure logical device, configuration register CRE0,CRE1,CRE2
---------------------------------------------------------------
MOV DX,2EH
MOV AL,09H
OUT DX,AC
DEC DX
MOV AL,30H
OUT DX,AL
INC DX
IN AL,DX
OR AL,10000000B
DEC DX
MOV AL,07H
OUT DX,AL
AIIS-1240 User Manual
Offset Description
30h Write 1 to bit 7 to enable GPIO
GPIO I/O Register
When set to a '1', respective GPIO port is pro-
E0h grammed as an input port.
When set to a '0', respective GPIO port is pro-
grammed as an output port.
GPIO Data Register
If a port is programmed to be an output port, then
E1h its respective bit can be read/written.
If a port is programmed to be an input port, then its
respective bit can only be read.
GPIO Inversion Register
When set to a '1', the incoming/outgoing port value
E2h is inverted.
When set to a '0', the incoming/outgoing port value
is the same as in data register.
60