Advantech AIIS-1240 User Manual page 54

3.2.3.1.3PCH Azalia Configuration

Azalia
Control detection of the Azalia device.
Disable=Azalia will be unconditionally disabled
Enable=Azalia will be unconditionally enabled
Auto=Azalia will be enabled if present, disabled otherwise.

LAN1 Controller
Enable or Disable LAN1 Controller.

LAN 1 Option-ROM
Enable or Disable LAN 1 boot option for legacy network devices.

Wake on LAN1 from S5
Enable or Disable LAN1 to wake the system. (The wake on LAN cannot be dis-
abled if ME is on at Sx state).

LAN2 Controller
Enable or Disable LAN2 Controller.

LAN 2 Option-ROM
Enable or Disable LAN 2 boot option for legacy network devices.

PCIE Wake
Enable or Disable PCIE to wake the system from S5.

High precision Timer
Enable or Disable high precision event timer.

SLP_S4 Assertion Width
Select a minimum assertion width of the SLP_S4# signal.

Restore AC Power Loss
Power Off, power On or Last State to restore AC power loss
AIIS-1240 User Manual
Figure 3.29 PCH Azalia Configuration
44