Explanatory Photos for DISASSEMBLY
• For the shooting direction of each photos used in this manual, see the photo below.
• A, B, C and D in the photo below indicate the shooting directions of photos.
• The photographs with no shooting direction indicated were taken from the top of the unit.
• Photos of M-CR612 U1B are used in this manual.
The viewpoint of each photograph
(Shooting direction : X) [View from the top]
↓Shooting direction: B↓
↑Shooting direction: A↑
1. TOP PANEL
Proceeding :
PANEL SIDE →
TOP PANEL
(1) Remove the screws.
x2
↓Shooting direction: C↓
↑Shooting direction: A↑
x2
x2
↑Shooting direction: D↑
2. FRONT PANEL ASSY
Proceeding :
PANEL SIDE →
TOP PANEL
(1) Open the CD tray and remove WINDOWS LOADER.
View from the bottom
View from the CD MECHA bottom
(2) Remove the screws.
x2
(3) Remove the screws. Remove the connector. Remove the ACETATE TAPE and wire.
CN225
ACETATE TAPE x4
39
→
FRONT PANEL ASSY
x4
View from the bottom
FPC101
WJ1
WJ2
x1
x2