Adjustment Procedure - Marantz SR6011 Service Manual

ADJUSTMENT
Adjusting Idling Current
1. Preparation
(1) Prepare a DC voltmeter.
(2) Place the unit under normal usage conditions, away from highly ventilated areas such as next to an
air conditioning machine or electric fan.
The set requires an ambient temperature of 15℃ to 30℃ and standard humidity.
(3) Settings of This Unit
• POWER (Power source switch) STANDBY
• SPEAKER (Speaker terminal) No load
(Do not connect equipment such as speakers or dummy resistors.)

2. Adjustment Procedure

(1) Remove the top cover and turn VR714 (ALL Channel) of the AMP PCB counterclockwise( c ) as far as
possible.
(2) Connect the DC Voltmeter to the test points.
FRONT-Lch : CN715
FRONT-Rch : CN725
CENTER ch : CN735
SURROUND-Lch : CN745
SURROUND-Rch : CN755
ASSIGN-2Rch : CN765
ASSIGN-1Rch : CN775
ASSIGN-2Lch : CN785
ASSIGN-1Lch : CN795
(3) Connect the power cord to an outlet. Next, press the power button to turn on the power.
(4) Set this unit as follows.
MASTER VOLUME : "---" ( c min.) : turn counterclockwise to the lowest position.
SPEAKER (Speaker terminal) : No load
(Do not connect equipment such as speakers or dummy resistors.)
MODE : MCH STEREO
FUNCTION : DVD
(5) Turn VR714 clockwise ( x ) and adjust the voltage of the test point to "6.5mV ± 0.5mV DC" within 2
minutes.
(6) 10 minutes after the preliminary adjustment, turn VR714 and set the voltage to "8.0mV ± 0.5mV
DC".
(7) Adjust the variable resistance of each channel using the same method.
AMP UNIT
DC Voltmeter
FR-CH
CN725
SR-CH
VR754
CN755 VR724
SR ch FR ch
CN785
ASSIGN2 L
ASSIGN1 L
CN795
VR784
VR794
ASSIGN2 Lch ASSIGN1 Lch
183
5CH AMP PCB
FL-CH
CN715
C-CH
CN735
VR734 VR714
C ch FL ch
4CH AMP PCB
CN775 ASSIGN1 R
ASSIGN2 R
CN765
VR774
VR764
ASSIGN2 Rch ASSIGN1 Rch
SL-CH
CN745
VR744
SL ch