Summary of Contents for N Brown Group Borneo WT413
Page 1
WT413 Cat No. Assembly Instructions - Please keep for future reference Borneo Sofa Set No. People Assembly Time 20 - 30 Minutes Important - Please read these instructions fully before starting assembly If you need help or have damaged or missing parts, call the JDW customer helpline: 0871 231 2000...
Page 2
Safety and Care Advice Important - Please read these instructions fully before starting assembly • • • Check you have all the Make sure you have We do not recommend the components and tools enough space to lay out use of power listed on the next pages.
Components - Panels Please check that you have all the components listed below before constructing your item. Part No Description Components - Fixings Please check that you have all the components listed below before constructing your item. M6x15mm M6x30mm Tools Required Allan Key Ruler - Use this to measure your screws (mm)
Page 5
Assembly Instructions Note: All Bolt Head Caps and Nut Caps should not be attached before finally tightening all Bolts with the Allen Key. Only tighten all bolts when you are satisfied with the alignment of all components. Step 1 • Connect the chair seat part (Part A), with the leg tube (Part B), fasten...
Page 6
Step 3 • Connect the two table leg tube (Part E and Part F), fasten them by bolts (Part I) and washers (Part K). Step 4 • Connect the table leg tube (Part E and Part F) with the table top (Part G), fasten them by bolts (Part I) and...
Page 7
Step 5 • Put the table glass (Part H) on the table top. CARE AND CLEANING: 1. TO CLEAN,WIPE WITH DAMP CLOTH.DO NOT USE BLEACH,ACID SOLVENTS OR ABRASIVE CLEANERS OR FRAME PARTS. 2. DURING VARYING WEATHER CONDITIONS AND WINTER PERIOD,WE STRONGLY RECOMMEND THAT IT CAN BE.STORED IN A DRY AREA WITH A SUITABLE COVER BEFORE STORAGE,PLS INSURE IT IS CLEAN AND DRY.