Download Print this page

Work Area; Electrical Safety; Personal Safety - XTline XT102700 Instructions Manual

Hide thumbs Also See for XT102700:

Advertisement

read this manual thoroughly before operating your new product, as it contains the information you need
to become familiar with its features and obtain the performance that will bring you continued enjoyment
for many years .Please keep this manual on file for future reference.
GENERAL SAFETY RULES –FOR ALL BATTERY OPERATED TOOLS
WARNING ! READ AND UNDERSTAND ALL INSTRUCTIONS.
Failure to follow all instructions listed below, may result in electric shock, fire and /or serious personal
injury .

Work area

1. Keep work area clean and well lit. Cluttered and dark areas invite accidents.
2. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids,
gases or dust. Power tools create sparks which may ignite the dust or fumes.
3. Keep children and bystanders away while operating a power tool. Distractions can cause you to lose
control

Electrical Safety

1)
Do not abuse the cord. Never use the cord to carry the tool. Keep cord away from heat, oil, sharp
edges, or moving parts. Replace damaged cords immediately. Damaged cords may create a fire.
(The following applies only to tools with a separate battery pack)
2) A battery operated tool with integral batteries or a separate battery pack must be recharged
only with the specified charger for the battery. A charger that may be suitable for one type of
battery may create a risk of fire when used with another battery.

Personal Safety

1.
Stay alert, watch what you are doing and use common sense when operating a power tool. Do not
use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment
of inattention while operating power tools may result in serious personal injury.
2.
Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep your hair, clothing, and
gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving parts.
3.
Avoid accidental starting. Be sure switch is in the locked or off position before inserting batter pack.
Carrying tools with your finger on the switch invites accidents.
4.
Do not overreach. Keep proper footing and balance at all times. Proper footing and balance enable
better control of the tool in unexpected situations
5.
Use safety equipment. Always wear eye protection, Dust mask, non-skid safety shoes, hard hat, or
hearing protection must be used for appropriate conditions.

Advertisement

loading

This manual is also suitable for:

Lcd777-1s