InnoMedia MTA8328-4 Quick Installation Manual

InnoMedia
Business VoIP ATA Models
MTA8328-4 MTA8328-8
MTA8328-24
Quick Installation Guide

Introduction

Expanding on InnoMedia's widely deployed Broadband IP Telephony
product family, the MTA8328 provides crystal-clear wideband voice
communications with a high degree of manageability, allowing rapid and
scalable SOHO/Enterprise VoIP service deployment.

Package Contents

1 MTA device

1 RJ-45 Ethernet Cable

1 12V AC Power Adaptor for MTA8328-4 and MTA8328-8

or 1 AC Power Cable for MTA8328-24
 1 Quick Install Guide
www.innomedia.com

Installation: MTA8328-4 MTA8328-8

MTA8328-4 Backview
MTA8328-8 Backview
 Plug the supplied power adapter into the MTA8328 "12V DC"
socket. The power LED will show steady green.
 Connect phones or other analog devices into any of the PHONE
ports on the MTA.
 Setup the MTA to connect to the Internet. Connect the yellow
Ethernet cable (supplied) into the WAN port on the MTA and
connect the other end into an available Ethernet port on your
router or network switch.
 Confirm that the MTA is successfully connected to the Router and
acquires an IP address. See WAN LED states in the LED table
below to confirm that the MTA is connected. The MTA WAN
interface is configured as a DHCP client by default, and may
obtain an IP address from a DHCP server.
© 2018 InnoMedia Inc. All right reserved.