Table of Contents
Advertisement
SCP-FCS717-022-03H
* Where n is 1 for System 1, 2 for System 2, and 3 for System 3.
† Connecting the inhibit pins of multiple PG-Flex systems that are sharing the same bypass pair prevents other systems from attempting
to use the bypass pair when it is currently being used by another system. The inhibit pin is grounded when the bypass pair is in use, and
-48 Vdc when the bypass pair is inactive.
Bypass Pairs
If subscriber drop testing is required, connect the metallic bypass pairs from the RT enclosure to the COT shelf
backplane wire-wrap pins as shown in
Bypass pairs can be connected directly to each PG-Flex system, or shared between other PG-Flex systems by
cascading the pairs between other systems.
Directly Connected Bypass Pairs. To connect the bypass pairs directly to each system, do the following:
1
For System 1, connect the metallic bypass pair from the Main Distribution Frame (MDF) to wire-wrap posts
BYPASS_1_T (Tip) and BYPASS_1_R (Ring) on the COT shelf (see
2
Repeat step 1 for Systems 2 and 3 using the following bypass pin pairs:
•
BYPASS_2_T, BYPASS_2_R for system 2
•
BYPASS_3_T, BYPASS_3_R for system 3
Shared Bypass Pairs. To share bypass pairs between PG-Flex systems, do the following:
When metallic bypass pairs are shared between PG-Flex shelves or to other Digital Loop
Carriers (DLC) systems, the INHIBIT lead must be connected between each shelf sharing the
bypass pairs.
1
For System n, connect the metallic bypass pair from the main distribution frame (MDF) to wire-wrap posts
BYPASS_n_T (Tip) and BYPASS_n_R (Ring) on the backplane of the first system in the COT shelf sharing
the bypass pair (see
2
Connect the metallic bypass pairs BYPASS_n_T and BYPASS_n_R on the first COT shelf in the cascade to
the next bypass pair terminations on the next system in the COT shelf sharing the bypass pair.
FCS-717 List 2B
Table 12. HDSL, Test, And Miscellaneous Connectors (Cont.)
Figure 8
(refer to
Figure
8).
January 6, 2003
Table 12
for bypass pair terminations and functions).
Figure
8).
Installation and Test
17
Advertisement
Table of Contents
