Makita CL114FD Instruction Manual page 9

When using attachment with lock function
To install an attachment, insert it to the suction inlet of the
cleaner until it clicks. Make sure that the attachment is locked.
4
3
2
► 1. Suction inlet 2. Attachment with lock function
3. Hook 4. Release button
NOTE: When installing the attachment with lock func-
tion, be sure to align the release button with the hook
on the attachment. If they are not aligned, the attachment
will not be locked and may come off from the cleaner.
To remove the attachment, pull it while pushing the release button.
1
► 1. Release button 2. Attachment with lock function
When using attachment without lock function
CAUTION:
To install an attachment without
lock function, twist and insert it in direction of the
arrow to secure the connection during use. To
remove the attachment, twist and extract it also in
direction of the arrow.
1
2
Cleaning (Suction)
Nozzle
Attach the nozzle to clean off tables, desks, furniture,
etc. The nozzle slips on easily.
1
► 1. Nozzle
Nozzle + Extension wand (Straight pipe)
The extension wand fits in between the nozzle and the
cleaner itself. This arrangement is convenient for clean-
ing a floor in a standing position.
► 1. Cleaner body 2. Extension wand 3. Nozzle
Corner nozzle
Fit on the corner nozzle for cleaning corners and crev-
ices of a car seat or furniture.
► 1. Corner nozzle 2. Cleaner body
9 ENGLISH
1
2
3
2
1