Display Timing; Video Input Level - Samsung SyncMaster 900IFT Owner's Instructions Manual

SE-900IFT-E
Great user manuals database on
4/29/92 5:23 PM Page 13

Display Timing

This screen displays the settings that are available to your
Hz
G
Factory Timing monitor. This screen only displays this information;
you cannot select a new setting.
31k/ 70 720x 400
31k/ 60 640x 480
43k/ 85 640x 480
54k/ 85 800x 600
1 With the menu off, push the MENU button. Push the
68k/ 85 1024x 768
button or
Previous Menu
is displayed.
2 Push the
3 Use the
factory timings.

Video Input Level

This feature will select the video signal level.
Hz
G
Video Input Level
With the menu off, push the MENU button.
1
Push the
0.7V 1.0V
Level" screen is displayed.
Previous Menu
2 Push the
selection screen.
3 Use the
NOTE: Some video cards use video signals higher than 1.0 V
which causes the display to be very bright.
For those video cards, select 1.0 V.
.
UserManuals.info
Chapter Three: Adjusting Your Monitor
%
button until the "Display Timing" screen
button to display the factory timing screen.
button or button to display the user and
$ %
button or button until the "Video Input
button to open the video input level
$ or % buttons to select 0.7 V or 1.0 V.
$
13