On-Screen Display
Menu
How to adjust
Video Input Level
Some video cards use video signals higher than 1.0V which causes the
display to be very bright. For those video cards, use this feature to
select the 1.0 V Level.
1
Push the Menu (
2
Push the
button or
◀
Push the
button or
▲
3
Push the Menu (
screen.
4
Use the
or
buttons to select 0.7 V or 1.0 V.
◀
▶
Display Timing
You can see the frequency (user control mode) used by the user, the
polarity of the operational signals, the default frequency (default mode)
set when you buy the monitor and the resolution level. Note: These
screens do not allow any changes to the settings, they are for
information only.
1
Push the Menu (
2
Push the
button or
◀
3
Push the Menu (
screen.
4
Use the
button to see the user control mode and the default mode.
▼
User's Manual
) button.
button until the Advanced screen is displayed.
▶
button to select Video Input Level.
▼
) button to open the Video Input Level selection
) button.
button until the Menu screen is displayed.
▶
) button to open the Display Timing adjustment
32