Water Filter - Jenn-Air JCD2290HE Use & Care Manual

Jenn-air jcd2290he: user guide
Table of Contents

Advertisement

Available languages

Available languages

I
CE AND
Dispenser LOCK
(select models)
The Dispenser LOCK prevents ice or water from
being dispensed.
To Lock Dispenser:
• Press and hold the LOCK button for three seconds.
A green indicator light above button will illuminate
when the dispenser is locked.
To Unlock Dispenser:
• Hold the LOCK button for three seconds. The green
indicator light above button will go out.
Water Filter Status Indicator Light
(select models)
The Water Filter Status Indicator Light serves as a
reminder to replace the water filter. A green light
indicates that the filter is in good condition. A red light
indicates the filter should be changed. Once light turns
red, it will remain red until function is reset.
To Reset Indicator:
• Press and hold both the LOCK and WATER
buttons simultaneously for four seconds. The
green filter status indicator light will flash
three times when the function has
successfully reset.
AUTO LIGHT
(select models)
The Auto Light function activates the dispenser
light at half-power when the Light Sensor
detects that the light levels in room are low.
To Activate Auto Light:
• Press AUTO LIGHT button. A green indicator light
above button illuminates when the sensor is active.
To Deactivate Auto Light:
• Press AUTO LIGHT button. The green indicator light
will go out.
Note:
When the dispenser pad is activated, the
dispenser light will operate when Auto Light is ON
or OFF.
W
ATER
LIGHT
(select models)
Press the LIGHT pad once to select the auto
light function, which activates the dispenser
light at half-power when the light sensor detects that
the light levels in room are low. The auto indicator
light will illuminate.
To Activate Light:
• Press the LIGHT pad again to turn the dispenser
light on continuously. The on indicator light will
illuminate.
To Deactivate Light:
• Press the LIGHT pad again to turn the dispenser
light off.
Sabbath Mode
(select models)
When activated, the Sabbath Mode deactivates
the control lights while leaving the control
operational.
To Activate Sabbath Mode:
• Press and hold the LOCK and AUTO LIGHT buttons
simultaneously for three to four seconds. After three
to four seconds, the dispenser lights will turn off.
To Deactivate Sabbath Mode:
• Press and hold both the LOCK and AUTO LIGHT
buttons simultaneously for three to four seconds.
After three to four seconds, the dispenser lights will
activate.
Notes:
• Dispenser light will not activate during dispensing
while in this mode.
• If the power fails, the control will remain in
Sabbath Mode when power returns.
EXPRESS FILL™ Button
The EXPRESS FILL™ Button works
independently of the dispenser controls,
providing an up-front alternative to the
dispenser pad for dispensing water. This feature is
convenient for filling large items that will not fit into the
dispenser area (i.e. sport bottles, pitchers, large pans,
coffee pots).
This feature allows added convenience of dispensing ice
and water simultaneously. To use, choose your preferred
ice mode from dispenser control panel. Press container
against dispenser pad while pressing the EXPRESS
button.
FILL
(select models)
18

Advertisement

Chapters

Table of Contents
loading

Table of Contents