Setup Instructions
Step 1
Required
• Part E: qty 4
• 3/16" Hex Key
1. Attach the angles to the seat
as shown. Do not tighten
completely.
Step 2
Required
• Part B: qty 6
• Part C: qty 6
• Part I: qty 6
• 9/16" Wrench
• 1/4" Hex Key
2. Place the seat cushion upside
down on the floor.
3. Attach the seat cushion to the
angle brackets. Make sure the
thicker portion is furthest away
from the two holes in the sides
of the legs.
4. Attach the angle brackets and
tube to the legs. Do not tighten
completely.
Adjustable Arm Subject's Chair
3700 Sagamore Parkway North . Lafayette, IN 47904
4