Advertisement
Lafayette Instrument Subject's Chair w/ Activity Sensor
SENSOR INSTALLATION AND SETUP
INSTALLATION:
1) If you have purchased your chair and sensors separately,
you must first install your activity sensors. If purchased
together, your sensors are already installed; proceed to the
Setup instructions on page (next page).
2) To install the arm cushions, peel back the arm cover and
remove the foam insert, connect the phone plugs to the jacks
inside the sensor pouch. Place the sensor into the cushion,
and close the cover. See Figures 1, 3, & 4.
3) To install the seat cushion, open the Velcro closure on the
rear of the cushion, remove the foam insert and replace with
the sensor so that the sensor cable is toward the back of the
chair. Push the sensor cable through the hole in bottom of
the seat and secure with the cable tie beneath the seat. See
Figures 2 & 4.
3700 Sagamore Parkway North . PO Box 5729 . Lafayette, IN 47903 USA . Ph: 765-423-1505
3700 Sagamore Parkway North . PO Box 5729 . Lafayette, IN 47903 USA . Ph: 765-423-1505
6
Advertisement
