Step 5
Required
• Part A: qty 2
• Part D: qty 2
• Part J: qty 2
• 9/16" Wrench
• 3/16" Hex Key
7. Attach the back piece as
shown. Put the clevis pin
through the plate and back
tube and secure in place with
the cotter pin.
8. Make sure that everything is
straight and tighten everything
down from previous steps.
Step 6
Required
• Part P: qty 2
• Part F: qty 4
• 5/32" Hex Key
9. Slide out the arms
approximately as shown and
attach the support plate with
the screws and the small
handles.
Adjustable Arm Subject's Chair
3700 Sagamore Parkway North . Lafayette, IN 47904
6