Charging The Battery - Newland MT90 Orca III User Manual

Charging the Battery

Connect the MT90 to a power outlet using the included AC adapter or USB cable. When the terminal's battery is less than
5%, it takes about 3 hours to fully charge it (The terminal is shut down or in sleep mode).
Note: Low battery may result in malfunction of the terminal. Before your first use, charge the battery for at least 8 hours.
When charging the MT90 with AC adapter or USB cable, the user is notified the charging statuses by the LEDs on the
terminal.
LEDs on the MT90
Blue LED on Fully charged
Red LED on Charging in progress
Red LED flashes constantly Low-battery alert
Note: If MT90 battery is completely drained, please press the power key to turn it on after 15 minutes of being charged.
8