Charging The Battery - Newland MT67 Sei User Manual

Charging the Battery

Connect the MT67 to a power outlet using the included AC adapter or USB cable. When the terminal's battery is less than
5%, it takes about 3 hours to fully charge it (The terminal is shut down or in sleep mode).
When charging the MT67 with an AC adapter or USB cable, the user is notified of the charging status by the LEDs on the
terminal.
Blue LED flashes once
Green LED on
Red LED on
Red LED flashes
Note: If the MT67 battery is completely drained, please press the power key to turn it on after 15 minutes of being charged.
Scan/Decode
Decode successfully
Charging /Battery Status
Fully charged
Charging in progress
Low-battery alert
6