Primo Water SL212C User Manual page 14

Rechargeable wet & dry hand vacuum cleaner
Table of Contents

Advertisement

Available languages

Available languages

completely.
2. After each use, the filter assembly should be cleaned. The filter
assembly is washable.
Attention: Never wash the filter with the device. It must first be
removed from the device before you proceed with its cleaning. Make
sure the filter is completely dry before reinstalling it in your vacuum
cleaner - do not wash your filter in the dishwasher and do not dry it by
using radiators or heating sources or hair dryers.
3. Wipe the outside of your appliance and its charger base with a slightly
damp cloth ensuring that no moisture will insert on the air
inlets/outlets or slots of your appliance and its charger base.
4. Do not clean the inside or outside surfaces of your appliance and
charger base with any abrasive scouring pad or steel wool, or abrasive
or deteriorating cleansers as this will damage the finish of your
appliance.
5. To protect against fire, electric shock or personal injury, NEVER
immerse any part of your appliance or its charger base or its
cord or plug in water or any other liquid.
TROUBLE SHOOTING
FAULT
The
appliance
not operating.
The vacuum motor
runs slowly
The body of the
appliance is hot
The power of your
appliance is not as
expected.
This product is in strict conformity with all the valid directives of
European Union applying on this type of electrical appliances.
Protecting the environment
Should you find one day that your appliance needs to be replaced
POSSIBLE REASON
is
- The charger base is
not connected to the
mains.
-There is no power
supply.
-The filter is full
-The dust bowl is full
-Appliance
must
recharged.
-This is normal whilst
using
the
appliance
for a long time.
- The appliance is not
fully charged.
POSSIBLE SOLUTION
-Connect your charger
base to the mains.
-Check
your
power supply.
-Replace or clean your
filter
-Empty the dust bowl.
be
-Reinstall the vacuum
cleaner on its charger
base to be recharged.
Let your appliance cool
down for a while before
its next use.
-Reinstall the vacuum
cleaner on its charger
base and let it be fully
charged.
home
13

Advertisement

Table of Contents
loading

Related Products for Primo Water SL212C

Table of Contents