Table of Contents
Advertisement
Available languages
Available languages
collection bins or contact your Public Authorities for advice on the
battery collection points.
USE INSTRUCTIONS
Wall mounting
Create two vertical holes on the wall you wish to mount your charger
base, according to the distance of the two slots which are located on the
rear end of your charger base. Be extra careful and make sure that there
are no hidden power cables or any kind of any other home supply cables
or tubes of your home on the spots you are about to make the holes.
Afterwards insert two plastic upas on the wall and then their screws (not
included in this package) to support the charger base.
You may alternatively place your appliance on your counter – but you
must first make sure that your counter surface is stable, flat and heat
resistant.
Then connect your charger base plug into the power supply socket.
Charging
Place your vacuum cleaner to its charger base. When installed properly in
place, the indicator light will illuminate indicating that the vacuum cleaner
is charging.
Charging time : 10-12 hours
Caution: The power switch of the device must always be in "OFF" position
when charging the device. Do not charge the device when the
temperature is higher than 37
Technical data:
Transparent dust bowl of 480ml capacity
Liquid bowl of 120ml capacity
Running time: 11min
Power: 6V (5 *1.2V NiMH batteries)
Use of your appliance
-
Lift your vacuum cleaner from its charger base.
-
Choose one of the attachments depending on the cleaning task you
want to carry out (absorption of liquids or collection of dust or
(37mm distance)
ο
C and lower than 0
ο
C .
11
Advertisement
Table of Contents
