Table of Contents
Advertisement
English
Inserting the disposal bag [8]
► Insert a new disposal bag (ENS-CT26/36/48)
on the inlet nozzle of the container and lock
in position.
Important: The lateral openings on the dis
posal bag must be positioned inside the
container. Make sure that the bolt engages.
► Place the disposal bag over the edge of the
container.
Make sure that the contacts [10-2] are
free.
► Replace the top section [2-1] and close the
locking clips [2-2].
9.3
Changing the filter element
NOTE
Motor damage
► Never operate the extractor without a filter
element fitted as the motor may become
damaged.
► Open the locking clips [2-2] and remove the
top section of the machine [2-1].
► Turn the top section of the machine so that
the main filter is facing upwards (Fig.[9]).
► Fold over the lever [9-3] and remove the re
tainer [9-2].
► Remove the used main filter and re
place [9-1] with a new one.
► Dispose of the used filter in accordance
with statutory regulations.
► Insert the retainer [9-2] and fold over the
lever [9-3] until it engages.
► Replace the top section [2-1] and close the
locking clips [2-2].
10 After finishing work
► Clean the main filter automatically or man
ually (see chapter "
► Switch off the mobile dust extractor and
pull out the mains plug.
► Wind up the mains power cable.
► Empty the dirt trap.
► Place the mobile dust extractor in a dry
room inaccessible to unauthorised users.
10.1 Emptying the dust container
The dust container [2-3] can be emptied once
the top section has been removed.
10
8.2
").
► After extracting fluids, clean the fill level
sensors [10-1] regularly with a soft cloth
and inspect for damage.
11 Service and maintenance
WARNING
Risk of injury, electric shock
► Always disconnect the mains plug from the
socket before performing maintenance
work on the machine!
► All maintenance and repair work which re
quires the motor housing to be opened
must only be carried out by an authorised
service workshop.
Customer service and repair only through
manufacturer or service workshops: Please
find the nearest address at: www.festool.com/
service
EKAT
4
5
3
2
1
Use only original Festool spare parts! Order No.
at: www.festool.com/service
Damaged safety devices and components must
be repaired or replaced in a recognised special
ist workshop, unless otherwise indicated in the
operating manual.
Observe the following instructions:
–
The manufacturer or an instructed person
must perform a dust test at least once a
year to determine whether the filter is
damaged, the machine is sealed properly
and the monitoring features are functioning
correctly.
–
Anything that cannot be cleaned must be
discarded in impermeable bags. Observe
applicable disposal regulations!
12 Accessories
Use only original Festool accessories and Fes
tool consumable material intended for this ma
chine because these components are designed
specifically for the machine. Using accessories
and consumable material from other suppliers
will most likely affect the quality of your work
Advertisement
Table of Contents
