Advertisement
Quick Links
Advertisement
Related Manuals for M-Triangel MT-17S
Summary of Contents for M-Triangel MT-17S
- Page 1 2018 Latest MT-17 Laminator with Debubbler User Manual 1.Safety Code ------------------------------------- 2.Specification ----------------------------------- 3.Operation -------------------------------------- 4.Maintenance ----------------------------------- <1>...
-
Page 2: Safety Code
1.Safety Code For your own safety, please read this manual carefully. Please get familiar with the application and restrictions of the machine as well as the related potential risks. A. Please read this manual carefully before using the machine. B. Please keep a sound grounding, bad grounding may result in equipment damage or endangering personal safety. -
Page 3: Operation
*Attention: Please check the filter every half month to make sure that there is no water inside. If not, please press the start button and then press the bottom of the glass jar to drain away water. 3.Operation 1. Before Using Plug in and open the power switch, rotate clockwise the red emergency button half-circle until it automatically pops up. - Page 4 *Attention: They are factory settings, please don’t adjust them by yourself. If you want to adjust them, please contact the original manufacturer. 3. Lamination of Curved Screen (1) Use the curve screen aligning mold. Locate the LCD on the mold and wipe it clean.
- Page 5 * Be aware that the glass should cover the LCD immediately after OCA is torn off, and the surface of the mold and the glass should be kept clean before bonding, so as to avoid dust entering. After the covering, please do not press the mold with force, and you only need to cover it gently and can directly put it into the laminating cabin, which is extremely important!
- Page 6 *Attention: Please put the flex cable out of the range of the silicon plate, or it will break the flex cable.（If you have any questions, please contact our after-sale technicians.） （4）Press start button for full automatic laminating. *Attention: Make sure the red emergency button popping up. （5）After starting, it’s normal that the vacuum data on the right of the screen will go up.
- Page 7 *Effect of vacuuming will be influenced by altitude, and when the data is above -88, it will have the best vacuuming effect. （6） Normally, the air will be released by 30s vacuum time, and then the laminating plate will slowly press down with pressure of 5-6kg. After 30s laminating time, the plate will rise up and the vacuum meter go zero.
- Page 8 * Attention: Before open the door each time, please make sure that there is no gas inside the cabin. Checking method: the pressure goes to zero. 2. Put the screen into the cabin and close the door. * Watch the pressure gauge during debubbling and make sure no air leakage 3.Click start button for debubbling , and wait until it automatically release the air and finish debubbling.
-
Page 9: Equipment Maintenance
*After pressing the start button, the debubbler will keep the pressure of 8kg for 10mins. Debbubling time can be adjusted according to the size of bubbles, at least 10-20mins; When power failure, the air inside the jar can be manually released through a red pull ring.