Advertisement
ASSEMBLY
CARE ADVICE
FAILURE TO FOLLOW THE GUIDELINES BELOW MAY
RESULT IN INJURY AND/OR PROPERTY DAMAGE.
Position each part correctly
and insert screws or bolts into
their respective holes.
Save the instructions and store
any supplied tools for later
maintenance.
Use the appropriate hand tools
or power tools for assembly.
Select steps, such as tightening
screws and/or bolts, may require
hand tools to avoid causing
damage during assembly.
4 / 20
Turn clockwise to tighten and
only tighten when step is
completed or when instructed
to do so.
After two weeks, check and
tighten any loose hardware and
repeat again every six months
thereafter.
AND MAY CAUSE SERIOUS INJURY.
Advertisement
