Subscribe to Our Youtube Channel
Related Manuals for Vallox MyVallox Touch
Summary of Contents for Vallox MyVallox Touch
- Page 1 Model Document MyVallox Touch D11058 Valid from 01.08.2022 Updated 07.09.2022 MyVallox Touch Manual Control panel...
-
Page 2: Table Of Contents
Automatic daylight-saving time......18 Compatibility of the MyVallox Touch control panel ....4 Turning the week clock on . -
Page 3: Safety
INTENDED USE All Vallox ventilation units have been designed to provide appropriate and continuous ventilation so as to present no threat to health and to maintain structures in good condition. IMPORTANT... -
Page 4: Disposal Of The Ventilation Unit
COMPATIBILITY OF THE MYVALLOX TOUCH CONTROL PANEL The control panel is compatible with all MyVallox ventilation units... -
Page 5: System Description
Modbus MyVallox Home MyVallox Touch VENTILATION UNIT CONTROL Ventilation unit control options. Operation of the Vallox ventilation unit can be controlled by the following means: • with a MyVallox Control/MyVallox Touch control panel • through the MyVallox Home user interface •... -
Page 6: Connecting The Ventilation Unit To The Cloud Service
To register your Vallox ventilation unit with the MyVallox Cloud service: Connect one end of the network cable to the grey connector of the Vallox ventilation unit and the other end to the router. 2. Open the network settings on the computer by selecting Start → My Computer →... -
Page 7: Control Panel Buttons
The Down arrow button takes you downwards in the menu. in the following table. The control panel has a The Statistics button opens the temperature, relative touch screen. humidity of air or carbon dioxide level graph (1 day). © Vallox Oy - All rights reserved... -
Page 8: Unit Software
Alternatively, the current software version can be checked from the Unit information display of the Service menu. The latest version can be found at: http://www.cloud.vallox.com. Updating the unit software Unplug the ventilation unit from the mains or turn off the fuse. -
Page 9: Setup
To use the manual daylight saving time setting: Select Off as the value of the Summer time setting. 2. The manual daylight-saving time setting is now on. 3. Proceed to the next phase by selecting OK. © Vallox Oy - All rights reserved... -
Page 10: Set The Date
MyVallox Touch Set the date Use the Plus and Minus buttons to set the date. 2. Select OK. 3. Use the Plus and Minus buttons to set the month. 4. Select OK. 5. Use the Plus and Minus buttons to set the year. 6. -
Page 11: Adjusting The Supply And Extract Air Flows
If the use of the ventilation unit was started before airflow adjustment, the airflow must be measured through the Setup menu (see “Save and restore settings”). This ensures that the unit settings are optimal for the adjustment of the airflows. © Vallox Oy - All rights reserved... -
Page 12: Ventilation Modes
MyVallox Touch VENTILATION MODES Four ventilation unit modes At home Use this mode when the dwelling or the premises are occupied. Using the At home, Away, and Boost modes Away according to need saves energy. Use this mode when the dwelling or premises are unoccupied, e.g. -
Page 13: Changing The Mode
Defrosting — The heat recovery cell is being defrosted. • Replace filters — Indicates the next recommended filter replacement date. • Time in operation — Indicates how long the device has been running. © Vallox Oy - All rights reserved... -
Page 14: Settings
MyVallox Touch Editing the ventilation mode settings Select Settings. 2. Select Ventilation mode settings. 3. Select OK. 4. Select the desired ventilation mode. 5. Select OK. 6. Use the Arrow buttons to select the setting that you want to edit. Select Edit. -
Page 15: Setting The Date The Filters Were Last Replaced
The maintenance reminder reminds you of the filter replacement with a pop-up window. The message can be acknowledged by selecting OK. You can postpone the reminder for one week by pressing the Back button. © Vallox Oy - All rights reserved... -
Page 16: Display Settings
3. Use the Arrow buttons to select Sleep time. 4. Select Edit. The MyVallox Touch panel automatically switches to the sleep mode when the pre-set Sleep time has elapsed. When you want to wake up the control panel, touch the touch screen. -
Page 17: Time And Date
4. Use the Plus and Minus buttons to set the date. 5. Select OK. 6. Use the Plus and Minus buttons to set the month. Select OK. 8. Use the Plus and Minus buttons to set the year. 9. Select OK. © Vallox Oy - All rights reserved... -
Page 18: Week Clock
MyVallox Touch Automatic daylight-saving time By default, automatic daylight-saving time is turned on. To use the manual daylight-saving time setting: Select Settings > Time and date. 2. Select OK. 3. Select Down arrow, until the 2/2 display opens. 4. Select Summer time. 5. -
Page 19: Turning The Week Clock On
In this example, the following weekly program has been set: • Mon-Fri 8-17, Away . • Mon-Fri 17-7, At home. • Sat 8-17, At home. • Sat 18-20, At home with a ventilation boost needed for cooking, for example. © Vallox Oy - All rights reserved... -
Page 20: Turning The Unit Off
MyVallox Touch • Sat 21-Mon 8, At home. To set the week clock, proceed as follows: Open the week clock. 2. Select Monday, and input the following settings: 3. For 08:00, select the Away mode. 4. For 17:00, select the At home mode. 5. -
Page 21: Troubleshooting
Either the control panel 24 VDC Check the cables from the unit to the control panel. Contact but the control panel is not power is lost, or the control panel is the service centre. working. damaged. © Vallox Oy - All rights reserved... - Page 22 MyVallox Touch...
- Page 23 MyVallox Touch © Vallox Oy - All rights reserved...
- Page 24 MyVallox Touch www.vallox.com Vallox Oy | Myllykyläntie 9-11 | 32200 LOIMAA | FINLAND...
Need help?
Do you have a question about the MyVallox Touch and is the answer not in the manual?
Questions and answers