Subscribe to Our Youtube Channel
Related Manuals for Vallox Pureo
Summary of Contents for Vallox Pureo
- Page 1 Model Document Vallox Pureo Control panel D10799 Valid from 25.06.2021 Updated 20.10.2021 Vallox Pureo Control Quick guide Control panel...
-
Page 2: Table Of Contents
Safety signs used in the instructions ......4 Compatibility of the Vallox Pureo control panel ....4 Control panel buttons . -
Page 3: Safety
INTENDED USE All Vallox air handling units have been designed to provide appropriate and continuous ventilation so as to present no threat to the health of people and to maintain structures in good condition. -
Page 4: Disposal Of The Air Handling Unit
COMPATIBILITY OF THE VALLOX PUREO CONTROL PANEL The control panel is compatible with the Vallox Pureo TX 500, 900, 1300, and 1800 air handling units. -
Page 5: Control Panel Buttons
Press the Select button to select the desired option. The Up arrow button takes you upward in the menu. The Down arrow button takes you downwards in the menu. The Menu button takes you from the main display to the menu. © Vallox Oy - All rights reserved... -
Page 6: Control Panel Symbols
Vallox Pureo Control Control panel symbols The following icons are used in the Vallox Pureo Control panel. SYMBOL DESCRIPTION The used running status is slow The used running status is fast The week clock is in use On/off status information of the unusual running status of the unit... -
Page 7: Using The Unit
• Stopped • Outdoor air efficiency limit restricts the operating speed • Supply air efficiency limit restricts the operating speed • Extra time switch controls the speed • Night cooling controls the speed © Vallox Oy - All rights reserved... -
Page 8: Fan Speeds
Vallox Pureo Control FAN SPEEDS The fan speeds menu enables setting the control method to speed control, pressure control, or air volume control and the running status to either slow or fast, as required by the control method, or setting the maximum boost speed. -
Page 9: Air Volume Control
Vallox Pureo Control Pressure control IMPORTANT Pressure control requires external duct pressure sensors. Air volume control © Vallox Oy - All rights reserved... -
Page 10: Temperatures
K factors of the fans and the boost K factors must be set settings. based on the type of the air handling unit. K FACTORS Vallox Pureo TX 500 Vallox Pureo TX 900 Vallox Pureo TX 1300 Vallox Pureo TX 1800 K factors... -
Page 11: Test Run
OK button. • Alarm class 1: An alarm that stops the unit has been activated • Alarm class 2: An alarm that does not stop the unit has been activated © Vallox Oy - All rights reserved... - Page 12 Deviation in the extract air The extract air temperature and the controller. temperature deviates from the set value. Pureo control panel, There are problems with the data communication error transfer bus between the control panel and the controller. Deviation in the supply air...
-
Page 13: Adjustment Charts
(the previously set speed will be used). Select the time and the day of the week by using the Arrow buttons and the speed by using the Fan icon. © Vallox Oy - All rights reserved... -
Page 14: Measurements
Vallox Pureo Control Measurements The software versions of the control panel and the unit can be found in the Unit information menu. The Measurements menu includes the following information: • Supply air temperature • Supply air temperature inside the duct •... -
Page 15: Turning The Unit Off
OK. If the unit has been turned off from the control panel, the air handling unit can be turned on by pressing on the display of the control panel. © Vallox Oy - All rights reserved... - Page 16 Vallox Oy | Myllykyläntie 9-11 | 32200 LOIMAA | FINLAND © Vallox Oy - All rights reserved...
Need help?
Do you have a question about the Pureo and is the answer not in the manual?
Questions and answers