Sony HT-A3000 Help Manual page 71

Help Guide
Sound Bar
HT-A3000
Enjoying Surround Effect (SOUND FIELD)
You can turn the surround effect on or off to suit sound sources.
Press SOUND FIELD to select the setting.
1
The setting appears in the front panel display.
[SF.ON]: The sound is output with the surround effect. This setting is suitable for experiencing the surround
sound with presence regardless of the genre.
[SF.OFF]: The sound is output without the surround effect.
Note
You cannot change the setting in the following conditions even if you press SOUND FIELD.
The BLUETOOTH device is connected in BLUETOOTH transmission mode.
A test tone is emitted.
Depending on the source, such as Dolby Atmos, this setting is always set to ON and cannot be changed.
Hint
You can select the type of the surround effect in
You cannot change the setting of [Sound Field Setting] when
Sound Mapping] is set to [On].
[Setup] - [Advanced Settings] - [Audio Settings] - [Sound Field Setting].
[Setup] - [Advanced Settings] - [Audio Settings] - [360 Spatial
5-034-491-11(1) Copyright 2022 Sony Corporation
71