Sony HT-A3000 Help Manual page 131

Help Guide
Sound Bar
HT-A3000
Sound skips or has noise.
If there is a device nearby that generates electromagnetic waves, such as a wireless LAN or a microwave oven in
use, set the optional speaker and the speaker system apart from it.
If there is an obstacle between the optional speaker and the speaker system, move or remove it.
Set the optional speaker and the speaker system in a position as close as possible.
Change the [Setup] - [Advanced Settings] - [Speaker Settings] - [Wireless Speaker Settings] - [RF Channel]
setting to [Off], and then change to [On] again.
Switch the network connection of the TV or Blu-ray Disc player from wireless to wired.
Set [Setup] - [Advanced Settings] - [Speaker Settings] - [Wireless Speaker Settings] - [Wireless Playback
Quality] to [Connection].
5-034-491-11(1) Copyright 2022 Sony Corporation
131