Cd/usb/mp3/wma/aac receiver with cenet control (47 pages)
Summary of Contents for Clarion DXZ368RMP
Page 1
Owner’s manual Mode d’emploi Bedienungsanleitung Istruzioni per l’uso Gebruiksaanwijzing Manual de instrucciones Bruksanvisning Manual de instruções CD/MP3/WMA RECEIVER/CeNET CONTROL RADIO CD/MP3/WMA/CONTRÔLE CeNET CD/MP3/WMA-RECEIVER/CeNET CONTROL RICEVITORE PER CD/MP3/WMA/CeNET CONTROL CD/MP3/WMA-RECEIVER/CeNET CONTROLE RADIO CD/MP3/WMA/CONTROL CeNET CD/MP3/WMA-LÄSARE/CeNET KONTROLL RECEPTOR CD/MP3/WMA/CONTROLO CeNET...
Page 2
Thank you for purchasing this Clarion product. ∗ Please read this ownerʼs manual in its entirety before operating this equipment. ∗ After reading this manual, be sure to keep it in a handy place (e.g., glove compartment). ∗ Check the contents of the enclosed warranty card and keep it carefully with this manual.
3. This unit is applicable for on-road 4 wheel ve- hicle purpose only. Use for tractor, fork truck, bulldozer, off road vehicle, 2 or 3 wheel motor bicycle, marine boat or other special purpose vehicle is not appropriate. DXZ368RMP...
Bitte ausbreiten und die nächste Seite lesen. / Volgende pagina uitvouwen en doorlezen a.u.b. / Glöm inte att vika ut och läsa nästa sida. / DXZ368RMP Note on compact discs Never stick labels on the surface of the compact disc or mark the surface with a pencil or pen.
Observera: Vik ut denna sida för att kunna se figurerna över bilstereons framsida medan du läser de olika kapitlen. Nota: Certifique-se de abrir esta página e consulte os diagramas frontais conforme realiza a leitura de cada capítulo. DXZ368RMP / HAUPTGERÄT...
CD/MP3/WMA mode. • Press the button to scroll the title during the CD- text play, while in the CD/MP3/WMA mode. DXZ368RMP [ BND ] button • Switch the band, or seek tuning or manual tuning while in the radio mode.
) standby mode in the DAB mode. ( This function is only DAB tuner. ) [ BND ] button • Switch the band. Press and hold the button for 1 second or longer to switch to the seek tuning or manual mode. DXZ368RMP...
Page 8
• Press the button to switch to the ADJ mode. • Press and hold the button for 1 second or longer to switch to the TV picture mode or VTR ( external ) picture mode. ] lever • Select a station. DXZ368RMP...
Display Items LCD Screen In extreme cold, the screen movement may slow down and the screen may darken, but this is normal. The screen will recover when it returns to normal temperature. DXZ368RMP...
4. Replace the cover and slide in until it clicks into place. DXZ368RMP Notes: Misuse may result in rupture of the battery, producing leakage of fluid and resulting in personal injury or damage to surrounding materials.
MP3/ WMA mode. Switch reception band. Move preset chan- nels up and down. No function. Preset scan. Press and hold the button for 2 seconds or longer: Auto store. No function. Switch between TV and VTR. DXZ368RMP...
∗ If the flip down panel does not open fully, gently open it with your hand. 3. Pull the DCP toward you and remove it. 4. Close the HOLD FLAP. DXZ368RMP CAUTION Be sure to close the HOLD FLAP for safety when removing the DCP.
BAL ( Balance ) : Adjustment range : L13 to R13 FAD ( Fader ) : Adjustment range : F12 to R12 ∗ The display returns to the previous mode 7 seconds after the adjustment. Clock ( CT ) Title display Main display TREB Previous DXZ368RMP...
3. When the adjustment is complete, press the [ A-M ] button several times until the function mode is reached. DXZ368RMP Adjusting MAGNA BASS EX The MAGNA BASS EX does not adjust the low sound area like the normal sound adjustment function, but emphasizes the deep bass sound area to provide you with a dynamic sound.
3. Press and hold one of the [ DIRECT ] button for 2 seconds or longer to store the current station into preset memory. ] lever upward or downward ] lever upward or downward ] lever to tune into a desired DXZ368RMP...
∗ Press and hold one of the [ DIRECT ] buttons for 2 seconds or longer to store that station into preset memory. DXZ368RMP RDS Operations RDS ( Radio Data System ) This unit has a built-in RDS decoder system that supports broadcast stations transmitting RDS data.
Page 17
“TRA INFO” appears in the display. If you press the [ TA ] button while a traffic announcement broadcast is being received, the traffic announcement broadcast reception is cancelled and the unit goes into the TA standby mode. DXZ368RMP...
∗ Press [ ADJ ] button to exit RDS MODE. ∗ “REG ON” only available when “AF ON”. DXZ368RMP This function enables you to listen to a broadcast of the selected programme type even if the unit is on a function mode other than radio.
If an emergency broadcast is received, all the function mode operations are stopped. “ALARM” appears in the display and the emer- gency broadcast can be heard. • Cancelling an emergency broadcast If you press the [ TA ] button, emergency broadcast reception is cancelled. DXZ368RMP...
( 0 to 33 ) . ∗ When the TA, ALARM or PTY interrupt ends, the volume returns to the level it had before the inter- rupt. DXZ368RMP CD/MP3/WMA Mode Operations What is MP3? MP3 is an audio compression method and classified into audio layer 3 of MPEG standards.
Just pressing the [ ] button ejects the disc even if the power to the unit was not turned on. 1. Press the [ OPEN ] button to open the FLIP DOWN PANEL. Play MP3/WMA Play CD Play MP3/WMA DXZ368RMP...
Page 22
• Discs not bearing the CD-ROMs cannot be played by this unit. • Some CDs recorded in CD-R/CD-RW mode may not be usable. DXZ368RMP Be careful not to catch your hand or fingers while closing the FLIP DOWN PANEL. Notes: •...
• The folder name will be displayed as “ROOT” which the file allocates in the root folder. • The MP3 player decodes each file ID3 TAG ver 2 by default, if ID3 TAG ver 2 is unavailable, ID3 TAG ver 1 will be decoded.
Press the [ DN ] button to move the previous folder. Press the [ UP ] button to move the next folder. DXZ368RMP ∗ Press the [ UP ] button while in the final folder to shift to the first folder.
SS ON SS MESSAGE. • Entering MESSAGE INFORMATION Message up to 30 characters long can be stored in memory and displayed as a type of screen saver setting. ∗ The factory default setting is “WELCOME TO CLARION”. ] button DXZ368RMP...
∗ The factory default setting is “ON”. 2-1. Select “DIMMER”. 3-1. Turn the [ ROTARY ] knob to select “ON” or “OFF”. DXZ368RMP To change other settings 1. Press the [ ADJ ] button to switch to the adjustment selection display.
This function is not compatible with all cellular ∗ telephones Contact your local authorized Clarion dealer for information on proper installation and compatibility. The factory default setting is “OFF”. ∗...
Page 28
4. Press and hold the [ BND ] button for 1 second or longer. All characters in the title disappear. 5. Press and hold the [ ] button for 2 seconds or longer to clear the title and cancel title input mode. DXZ368RMP...
Press the [ UP ] or [ DN ] button to select the desired disc. ∗ If a CD is not loaded in a slot of magazine, press- ing the [ UP ] or [ DN ] button can not work. User DXZ368RMP...
“ALL...” and “RDM” light in the display and disc random play starts. • To cancel play 1. Press the operating button previously selected. DXZ368RMP TV Operations Note: • The following operations are performed the same as for radio mode: ∗...
1. Press the [ SRC ] button to select the DAB mode. 2. Press and hold the [ BND ] button for 1 second or longer. “MANU” lights up in the display. 3. Press the [ ] lever upward or downward to select a station. S-LABL ... DXZ368RMP...
4. Press and hold one of the [ DIRECT ] buttons ( 1 to 6 ) for 2 seconds or longer to store the programme. DXZ368RMP Note: • The interrupt programme ( PTY or INFO ) cannot be written into a manual memory.
Page 33
• TA ( Traffic Announcement ) • PTY • Emergency broadcast • Switching the PTY and INFO display language • Volume setting of TA, INFO emergency broadcast ( ALARM ) and PTY Weather DXZ368RMP...
Nothing happens when button are pressed. Display is not accurate. No sound heard. DXZ368RMP Cause Fuse is blown. Replace with a fuse of the same amperage. If the fuse blows again, consult your store of purchase.
Page 35
Let dry for about 1 hour with the power on. form on the internal lens when the car is parked in a humid place. File system is not Use ISO9660 level 1, 2 or JOLIET or Romeo correct. file system. Measure DXZ368RMP...
ERROR P Parental level error. Region code error. ERROR R DXZ368RMP Cause This is a failure of CD deckʼs mechanism and consult your store of purchase. Replace with a non-scratched, non-warped- disc.
• Specifications and design are subject to change without notice for further improvement. • Please make sure when connecting external power amplifier, that you properly, to the car chassis, ground the amplifier. • If this is not done, severe damage to the source unit may happen. DXZ368RMP...
Need help?
Do you have a question about the DXZ368RMP and is the answer not in the manual?
Questions and answers