Sony AC-300MD Instructions For Use Manual page 15

Important EMC notices for use in the medical environments
• The AC-300MD needs special precautions regarding EMC and needs to be installed and put into service according to
the EMC information provided in this Instructions for Use.
• The portable and mobile RF communications equipment such as cellular phones can affect the AC-300MD.
Warning
The use of accessories and cables other than those specified, with the exception of replacement parts sold by Sony
Corporation, may result in increased emissions or decreased immunity of the AC-300MD.
Guidance and manufacturer's declaration-electromagnetic emissions
The AC-300MD is intended for use in the electromagnetic environment specified below.
The customer or the user of the AC-300MD should assure that it is used in such an environment.
Emission test
RF emissions
CISPR 11
RF emissions
CISPR 11
Harmonic emissions
IEC 61000-3-2
Voltage fluctuations/
flicker emissions
IEC 61000-3-3
Warning
If the AC-300MD should be used adjacent to or stacked with other equipment, it should be observed to verify normal
operation in the configuration in which it will be used.
Compliance
The AC-300MD uses RF energy only for its internal function.
Group 1 Therefore, its RF emissions are very low and are not likely to
cause any interference in nearby electronic equipment.
The AC-300MD is suitable for use in all establishments,
Class B including domestic establishments and those directly connected
to the public low-voltage power supply network that supplies
buildings used for domestic purposes.
Class D
Complies
Electromagnetic environment-guidance
GB
GB
3