Using Sleep Timer; Timer Priority - JVC MX-K50 Instruction Manual

4
Set the on-time you want the unit to
turn on.
1) Press 4 or ¢ to set the hour, then
press SET.
2) Press 4 or ¢ to set the minute,
then press SET.
"OFF TIME" appears for 2 seconds, then
the unit enters off-time setting mode.
5
Set the off-time you want the unit to
turn off (on standby).
1) Press 4 or ¢ to set the hour, then
press SET.
2) Press 4 or ¢ to set the minute, then
press SET.
The unit enters preset station selecting
mode.
6
Select the preset station.
1) Press 4 or ¢ to select the band
("TUNER FM" or "TUNER AM"), then
press SET.
2) Press 4 or ¢ to select a preset channel
number, then press SET.
The REC (recording timer) indicator stops
flashing and remains lit. The settings you
have done are shown on the display in
sequence for your confirmation.
7
Press STANDBY/ON to
turn off the unit (on standby) if
necessary.
About the recording source
If you change the source while recording, the recording also
changes.
To turn on or off Recording Timer after its setting is
done
1 Press CLOCK/TIMER repeatedly until
"REC" appears on the display.
2 To turn off the Recording Timer, press
CANCEL/DEMO.
The REC (recording timer) indicator goes off
from the display ("OFF" appears for a while).
The Recording Timer is canceled, but the
setting for the Recording Timer remains in
memory until you change it.
To turn on the Recording Timer, press SET.
The REC (recording timer) indicator lights up
on the display. The settings you have done are
shown on the display in sequence for your
confirmation.

Using Sleep Timer

With Sleep Timer, you can fall asleep to music.
You can set Sleep Timer when the unit is turned on.
How Sleep Timer actually works
The unit automatically turns off after the specified time
SET
length passes.
On the remote control ONLY:
1
Press SLEEP.
The time length until the shut-off time
appears and the SLEEP indicator starts
flashing on the display.
• Each time you press the button, the time length
changes as follows:
SET
2
Wait for about 5 seconds after specifying
the time length.
The SLEEP indicator stops flashing and remains lit.
To check the remaining time until the shut-off time,
press SLEEP once so that the remaining time until the shut-
off time appears for about 5 seconds.
SET
To change the shut-off time, press SLEEP repeatedly until
the desired time length appears on the display.
To cancel the setting, press SLEEP repeatedly until "OFF"
appears on the display so that the SLEEP indicator goes off
STANDBY
from the display.
STANDBY/ON
• Sleep Timer is also canceled when you turn off the unit.

Timer Priority

Since each timer can be set separately, you may wonder
what happens if the setting for these timers overlaps.
Here are some examples.
• Recording Timer has priority over Daily Timer.
If Recording Timer is set to come on while Daily Timer is
CLOCK
/ TIMER
operating, Daily Timer is canceled and Recording Timer
start working.
CANCEL
/ DEMO
• If Sleep Timer overlaps with another timer (either Daily
Timer or Recording Timer), a timer with the earlier shut-
off time has priority.
SET
When using the Recording Timer and Sleep Timer at
the same time, pay special attention to the shut-off time.
– 21 –
SLEEP10 SLEEP20
SLEEP120
OFF
(Canceled)
AM 6:00
Recording Timer
Daily Timer
AM 6:00
Sleep Timer
Recording Timer
SLEEP
SLEEP30 SLEEP60
SLEEP90
7:30
6:30 7:00
canceled.
7:30
6:30 7:00
canceled.