Using Sleep Timer - JVC MX-J170VUS Instruction Manual

7
Select the preset station.
1) Press 4 or ¢ to select the
band ("FM" or "AM"), then
press PROGRAM/SET.
2) Press 4 or ¢ to select a
preset channel number.
8
Press PROGRAM/SET.
The indicator stops flashing and
remains lit.
If you have set the Recording Timer with
the unit turned on, turn off the unit.
The REC indicator lights up when the unit is turned off
(on standby).
To select Recording or Daily Timer after its setting has
been done
Press TIMER ON/OFF on the remote
control.
Each time you press the button, the timer mode
changes as follows:
TIMER
OFF
TIMER: Select this when you want to use only the
Daily Timer.
REC: Select this when you want to use only the
Recording Timer.
TIM+REC: Select this when you want to use both the
Daily Timer and the Recording Timer.
OFF: Select this when you do not want to use
the timer.
• When the timer is set to OFF, the
REC indicator goes off from the display.
Even if the Recording or Daily Timer is canceled, but the
setting condition for the Recording or Daily Timer remains
in memory.
• When any timer setting is activated, the
or REC indicator lights up again.
If the unit is operating when the timer-on time comes
Recording or Daily Timer does not work.
PREV
NEXT
PROGRAM/SET
PROGRAM/SET
TIMER
ON/OFF
REC
TIM+REC
indicator and/or
indicator and/

Using Sleep Timer

With Sleep Timer, you can fall asleep to music.
You can set Sleep Timer when the unit is operating.
How Sleep Timer actually works
The unit automatically turns off after the specified time
length passes by.
On the remote control ONLY:
1
Press SLEEP.
The time length until the shut-off time
appears and the SLEEP indicator lights up on
the display.
• Each time you press the button, the time length changes
as follows:
90 MIN
OFF 15 MIN
(Canceled)
2
Wait for about 5 seconds after specifying the
time length.
The SLEEP indicator remains lit.
To check the remaining time until the shut-off time, press
SLEEP once so that the remaining time until the shut-off time
appears for about 3 seconds.
To change the shut-off time, press SLEEP repeatedly until
the desired time length appears on the display.
To cancel the setting, press SLEEP repeatedly so that the
SLEEP indicator goes off.
• Sleep Timer is also canceled when you turn off the unit.
– 23 –
SLEEP
60 MIN
45 MIN
30 MIN