Advertisement
Installation in Your Car (Continued)
CAUTION:
Do not plug the cigarette lighter adapter into the cigarette lighter until you have completed the installation.
3
Plug the cigarette lighter adapter into the back
of the cradle—DC 12 V.
Back of the cradle
ANT.
DC 12V
FM OUT
6
AUDIO
4
Activate the FM signal transmitter and preset the
frequency (refer to "4 FM Transmitter Options"
on page 24 of KT-SR2000 Instructions).
• It is recommended to preset the same frequency
into your car stereo as you have selected so you
can easily tune in to the frequency.
Note: You can also connect a cassette adapter or
an audio cord (both not supplied) to the AUDIO
jack to send the signals to your car stereo.
An optional hard-wired FM transmitter—FM
Switching Box Assembly (Parts No. 112C3159) is
available. By connecting this Assembly between
the FM OUT terminal of the cradle and the
antenna input terminal of your car stereo, you can
obtain stable and reliable transmission/reception.
Advertisement
