Page 1
SuperFast A3 Laminator For Professional Use Scan here to watch a helpful hints video Please read this manual completely before using your laminator as incorrect use can cause serious damage.
Operating Instructions Safety Precautions Failure to comply with any of the following safety precations could result in serious injury, fi re or electric shock. This equipment is not intended for use by children. It is not a toy. Unauthorised attempts at repair will invalidate the warranty. Do not allow water, or damp media, to enter the laminator.
Product Warranty Swordfi sh Laminator SWORDFISH 2-YEARS LIMITED WARRANTY FOR PARTS AND LABOUR Swordfi sh laminators are warranted against failure or malfunction due to faulty components or workmanship for a period of two years from the date of purchase by the original consumer. Defects or failures, which have been caused by incorrect or wrongful use, regardless whether unintentional or intentional during the operation or maintenance of the device, are excluded from the warranty.
Page 5
Operating Instructions Please read this manual completely before using your laminator as incorrect use can cause serious damage. Failure to follow the instructions in this manual could invalidate your warranty! Quick Start Guide Position the laminator on a suitable fl at surface, within easy reach of a 13Amp socket, ensuring that there is suffi cient space behind the machine for the laminations to lay fl at.
Operating Instructions Getting Started The Swordfi sh SuperFast Laminator is a real timesaver. The verstaile machine is equipped with sophisticated temperature control, four precision rollers and rapid warm-up time and laminating speed – all of which combine to give perfect laminations. Position the laminator on a level surface, close to a 13Amp socket.
Operating Instructions Operation Connect the laminator to a 13Amp socket and press the isolating switch on the back of the machine to the “on” position. The “cold” and “ready” lights will illuminate and the machine will start running in cold lamination mode.
Page 8
A cardboard carrier will absorb some of the heat so you may need to adjust the temperature settings accordingly. Swordfish Armoured pouch carriers are made from PTFE-coated micro-fine woven fibreglass and will require little or no temperature adjustment. Note that the maximum thickness of carrier + pouch + contents MUST NOT EXCEED 0.6mm.
Page 9
Operating Instructions The laminated item will be transported out of the laminator automatically. CAUTION • Do not try to pull the pouch out by force. This may result in creases or curves in the laminated item and may damage the laminator. •...
Operating Instructions Essential Information • Never insert a pouch until the previous lamination has been removed from the machine. Failure to do so could cause a jam. • The maximum capacity of this machine (pouch + contents) is 0.6mm. • Should a miss-feed or jam occur, press the “reverse button” to eject the pouch. The rollers will reverse direction and the pouch will be ejected through the entry slot.
Operating Instructions Cleaning The outer case of the machine may be wiped clean with a moist cloth. Do not allow water to spill inside the laminator – risk of electric shock. IMPORTANT Do not use aerosol cleaners – or any other aerosol product – on, or near, this machine (or any other electrical appliance) as the propellant may be flammable.
Page 12
Have you seen the rest of the Swordfi sh range? Pencil Sharpeners The Triple Pointi VariPoint Paper Shredders Paper Trimmers SlimLine 800XC Series A4, A3 1200XXCD Elite Series A3/A2 To fi nd out more information on the full range of products, www.snopakebrands.com visit us at www.snopakebrands.com...
Need help?
Do you have a question about the SuperFast A3 and is the answer not in the manual?
Questions and answers