Table of Contents
Advertisement
Safety notes
2.4 General requirements
Disconnecting device
A switch or circuit-breaker (min. 1 A) shall be included in the building installation for mains-
powered versions. It shall be in close proximity to the equipment and within easy reach of the
operator. It shall be marked as the disconnecting device for the equipment. Before removing
the inner plastic cover, the mains power shall be switched off. After installing the main power
cable, the protection cover has to be installed with the two screws.
14
Operating Instructions, 05/2011, A5E03424739-01
SITRANS FUE950
Advertisement
Table of Contents
