Electrolux EW7F249S User Manual page 7

7. Remove the three transit bolts and pull out
the plastic spacers.
We recommend that you
keep the packaging and
the transit bolts for any
transport of the appliance.
3.2 Information for installation
1. Positioning and levelling
Correctly adjusting the appliance so that
it is level prevents vibration, noise and
movement of the appliance when in
operation.
1. Install the appliance on a flat hard
floor. The appliance must be levelled and
stable. Make sure that the appliance
does not touch the wall or other units and
there is air circulation below the
appliance.
2. Loosen or tighten the feet to adjust the
level. All feet must rest firmly on the floor.
8. Put the plastic caps, that you find in the
user manual bag, in the holes.
2. The inlet hose
1. Connect the water inlet hose to the
back of the appliance.
x4
2. Position it toward left or right
depending on the positon of the water
tap. Make sure that the inlet hose is not
in vertical position.
WARNING!
Do not put cardboard, wood
or equivalent materials
below the appliance feet to
adjust the level.
CAUTION!
Make sure there is no
damage to hoses and there
are no leaks from the
couplings. Do not use an
extension hose if the inlet
hose is too short. Contact
the service centre for a
replacement inlet hose.
O O
20 20
ENGLISH 7
O O
45 45