Electrolux EW7F4722NFB User Manual
  1. Manuals
  2. Brands
  3. Electrolux Manuals
  4. Washer
  5. EW7F4722NFB
  6. User manual

Electrolux EW7F4722NFB User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
EW7F4722NFB
EN
Washing Machine
User Manual

Advertisement

Table of Contents
loading

Related Manuals for Electrolux EW7F4722NFB

Summary of Contents for Electrolux EW7F4722NFB

  • Page 1 EW7F4722NFB Washing Machine User Manual...

  • Page 2: Table Of Contents

    15. TECHNICAL DATA..................41 WE’RE THINKING OF YOU Thank you for purchasing an Electrolux appliance. You’ve chosen a product that brings with it decades of professional experience and innovation. Ingenious and stylish, it has been designed with you in mind. So whenever you use it, you can be safe in the knowledge that you’ll get great results every time.

  • Page 3: Safety Information

    ENGLISH SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damages that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference.

  • Page 4: Safety Instructions

    The appliance must be connected to the water mains • using the new supplied hose sets, or other new hose sets supplied by the Authorised Service Centre. Old hose sets must not be reused. • If the mains power supply cable is damaged, it must •...
  • Page 5 ENGLISH 2.2 Electrical connection testing of the appliance with the use of water in the factory. WARNING! • You can extend the drain hose to Risk of fire and electric maximum 400 cm. Contact the shock. Authorised Service Centre for the other drain hose and the extension.

  • Page 6: Installation

    3. INSTALLATION 3.2 The appliance is equipped WARNING! with ... Refer to Safety chapters. 3.1 Be prepared for installation It is recommended that installation is carried out by two persons. 3.3 Unpacking WARNING! Use the gloves. WARNING! Remove all the packaging and the transit bolts before installing the appliance.
  • Page 7 ENGLISH 3. Remove the polystyrene protection from the bottom. 4. Return the appliance in vertical position and remove the socket polystyrene protection. 5. Remove the power supply cable and the drain hose from the hose holders. It is possible to see water flowing from the drain hose.
  • Page 8 7. Close the holes with the plastic caps you find in the user manual bag. Put the smallest cap F in upper hole and the two bigger caps G in lower holes. We recommend that you keep the packaging and the transit bolts for any movement of the appliance.
  • Page 9 ENGLISH 3.5 Hose and cable connection 1100 mm 1450 mm 1020 mm 760 mm 1360 mm 900 mm The inlet hose 1. Remove the inlet hose from inside the drum. 2. To connect the water inlet hose towards the proper direction and with the proper inclination, check the position of the water tap before connecting it to the back of the appliance.
  • Page 10 5. Connect the water inlet hose to the cold water tap with 3/4 thread. WARNING! Make sure that there are no leaks from the couplings. Use the hose supplied with appliance. Do not use an extension hose if the inlet hose is too short. Contact the Authorised Service Centre for an inlet hose replacement.
  • Page 11 ENGLISH To a wall-pipe Directly to a built-in drain pipe in the room wall and tighten it with the supplied cable tie You can extend the drain hose to maximum 400 cm. Contact the service centre for the other drain hose and the extension. 3.6 Building in This appliance has been designed to be built into the kitchen furniture.
  • Page 12 Before proceeding with appliance building in, bring it near the recess and preposition the inlet hose, the drain hose and the mains cable. WARNING! Make sure they are not kinked or squashed. 3.7 Preparation and assembly of the cupboard door The dimensions of the cupboard door should be: •...
  • Page 13 ENGLISH If the cupboard door has to be opened from left to right, invert the position of the hinge supports M with the magnetic plate N and lower plate O. Make sure that the plate with magnet is on the upper position.
  • Page 14 Hinges To mount the hinges it is necessary to drill two holes (dia. 35 mm, depth 12.5 - 14 mm depending on the depth of cupboard door) on the inner side of the door. The hinges will be fixed to the door by means of the four supplied screws A.

  • Page 15: Product Description

    ENGLISH 4. PRODUCT DESCRIPTION 4.1 Appliance overview 10 11 12 Hinge supports Drain pump filter Detergent dispenser Front feet for levelling the appliance Control panel Drain hose Magnetic plate Mains cable Door handle Inlet hose connection Rating plate Back feet for levelling the appliance Plate with rubber beater 5.
  • Page 16 Soft Plus touch button and The permanent options are permanent Extra Rinse option set by holding pressed the relative button for at least 3 Prewash touch button and seconds. permanent Stain option Programme dial Spin reduction options touch button Display •...

  • Page 17: Dial And Buttons

    ENGLISH Add garments indicator. it lights at the beginning of the wash‐ ing phase, when it is still possible to pause the appliance and add more laundry. Child safety lock indicator. Drum clean indicator. This is a recommendation to perform the drum cleaning.
  • Page 18 The rinse Pour the stain remover into compartment phase uses more water for some washing programmes This option increases the • Night . The related indicator programme duration. comes on. This option is not available...
  • Page 19 ENGLISH When you set a washing programme, the This option can increase the display shows the default duration and programme duration. dashes. When the programme stops the display Touch Time Manager button to reduce shows , the indicator goes off the programme duration according to your needs.

  • Page 20: Programmes

    6.14 Start/Pause In some appliances the programme duration is Touch the Start/Pause button to reduced without showing start, pause the appliance or interrupt a any dashes. running programme. 7. PROGRAMMES 7.1 Programme Chart Programme Reference Maxi‐ Programme description Default tem‐...
  • Page 21 ENGLISH Programme Reference Maxi‐ Programme description Default tem‐ spin (Type of load and soil level) perature speed load Temperature range Steam programme Steam programme for cotton and synthetic items. Steam can be used for dried washed or worn once laundry. This programme reduce creases and odours and re‐...
  • Page 22 Programme Reference Maxi‐ Programme description Default tem‐ spin (Type of load and soil level) perature speed load Temperature range 800 rpm 3 kg Single synthetic blanket, padded clothes, duvets, down jackets and similar items. Duvet 40 °C 60 °C - Cold 800 rpm 1.5 kg...
  • Page 23 ENGLISH Programme Reference Maxi‐ Programme description Default tem‐ spin (Type of load and soil level) perature speed load Temperature range 800 rpm 3 kg Special programme for Denim clothing (Maximum with delicate washing phase to minimize Denim reference colour fading and marks. For better care a 30 °C spin speed reduced load size is recommended.
  • Page 24 Programme ■ ■ Steam ■ ■ ■ Spin/Drain ■ ■ ■ ■ ■ Rinse ■ ■ ■ ■ Duvet ■ ■ ■ ■ Rapid 14min ■ ■ ■ ■ ■ ■ Sport ■ ■ ■ ■ ■ Outdoor ■...

  • Page 25: Settings

    ENGLISH 7.2 Woolmark Apparel Care - Blue The wool wash cycle of this machine has been approved by The Woolmark Compa‐ ny for the washing of wool garments label‐ led as «hand wash» provided that the gar‐ ments are washed according to the instruc‐ tions issued by the manufacturer of this washing machine.
  • Page 26 3. Press the On/Off button for a few seconds to activate the appliance. A short tune sounds. - Compartment for prewash phase, soak programme or stain re‐ 10.2 Loading the laundry mover. 1. Open the appliance door. 2. Empty the pockets and unfold the...
  • Page 27 ENGLISH 2. Press the lever down to remove the 2. To change the temperature and/or dispenser. the spin speed, touch the related 3. To use powder detergent, turn the buttons. flap up. 3. If desired, set one or more options by 4.
  • Page 28 10.9 Interrupting a programme desired delay time. On the display and changing the options the indicator shows Touch the Start/Pause button. The When the programme is running, you appliance lock the door and starts the can change only some options: countdown of the delay start.
  • Page 29 ENGLISH While a programme or the delay start • The time area shows and the operates, the appliance door is locked. display shows the door locked The display shows the indicator • The indicator of the Start/Pause button starts flashing. 1.

  • Page 30: Hints And Tips

    If you set a programme or an option that ends with water in the drum, the Stand-by function doesn't deactivate the appliance to remind you to drain the water. 11. HINTS AND TIPS releasing lots of fluff that could block...

  • Page 31: Care And Cleaning

    ENGLISH • To help the environment, do not use • To use the correct quantity of more than the recommended quantity detergent, check the water hardness of detergent. of your domestic system. Refer to • Follow the instructions that you find "Water hardness".
  • Page 32 12.4 Door seal with double lip 3. Add a small quantity of powder detergent into the empty drum, in trap order to rinse out any left residues. This appliance is designed with a self Occasionally, at the end of a...
  • Page 33 ENGLISH 12.7 Cleaning the drain pump WARNING! Disconnect the mains plug from the mains socket. Regularly check the drain pump filter and make sure that it is clean. Clean the drain pump if: • The appliance does not drain the water.
  • Page 34 1. Open the pump cover. 2. Place a suitable bowl below the drain pump access to collect the water that flows out. Always keep a rag nearby to dry up any water spillages when removing the filter. 180˚ 3. Turn the filter 180 degrees in anti-clockwise direction to open it, without removing.
  • Page 35 ENGLISH 7. If it is necessary, remove fluff and objects from the filter recess. Make sure that the impeller of the pump can rotate. If it does not rotate, contact the Authorised Service Centre. 8. Clean the filter under the water tap. 9.

  • Page 36: Troubleshooting

    12.8 Cleaning the inlet hose and the valve filter 45° 20° 12.9 Emergency drain remaining water from the inlet hose and the drain pump. If the appliance cannot drain the water, 1. Disconnect the mains plug from the carry out the same procedure, described mains socket.
  • Page 37 ENGLISH 13.1 Introduction The appliance does not start or it stops during operation. First try to find a solution to the problem (refer to the table). If the problem persists, contact the Authorised Service Centre. WARNING! Deactivate the appliance before carrying out any check. In case of major problems, the acoustic signals operate, the display shows an alarm code and the Start/Pause button may flash continuously:...
  • Page 38 13.2 Possible failures Problem Possible solution • Make sure that the mains plug is connected to the mains socket. • Make sure that the appliance door is closed. • Make sure that there is no damaged fuse in the fuse box.
  • Page 39 ENGLISH Problem Possible solution • Make sure that the couplings of the water hoses are tight and there is not water leakages. There is water on the • Make sure that the water inlet hose and the drain hose floor. have no damages.

  • Page 40: Consumption Values

    13.3 Emergency door opening To open the door, proceed as follows: 1. Press the On/Off button to switch the In case of power failure or functioning appliance off. failure the appliance door remains 2. Disconnect the mains plug from the locked.

  • Page 41: Technical Data

    ENGLISH At the start of the programme, the display shows the programme dura‐ tion for the maximum load capacity. During the washing phase the programme duration is automatically cal‐ culated and can be greatly reduced if the laundry load is lower than the maximum load capacity (e.g.
  • Page 42 Level of protection against ingress of solid parti‐ IPX4 cles and moisture ensured by the protective cov‐ er, except where the low voltage equipment has no protection against moisture Water supply pressure Minimum 0.5 bar (0.05 MPa) Maximum 8 bar (0.8 MPa)
  • Page 43 ENGLISH...
  • Page 44 www.electrolux.com/shop...

Table of Contents