Basic Functions - Carrier 40MBAB Owner's Manual

40MBAB: Owner's Manual

BASIC FUNCTIONS

NOTE: Before operation, ensure the unit is plugged in and power is
available.
SETTING TEMPERATURE
The operating temperature range for units is 60-86°F (16-30°C).
You can increase or decrease the set temperature in 1°F (1°C) increments.
AUTO Mode
1
3
Fig. 6 —Auto Mode
In AUTO mode, the unit will automatically select the COOL, FAN, or
HEAT function based on the set temperature.
1.Press the MODE button to select AUTO.
2.Set your desired temperature using the TEMP
3. Press the ON/OFF button to start the unit.
NOTE: FAN SPEED cannot be set in AUTO mode.
Cool Mode
1
4
3
Fig. 7 —Cool Mode
1. Press the MODE button to select COOL mode.
2. Set your desired temperature using the TEMP
3. Press FAN button to select the fan speed: AUTO, LOW, MED,
HIGH.
4. Press the ON/OFF button to start the unit.
Manufacturer reserves the right to change, at any time, specifications and designs without notice and without obligations.
2
A221170
or TEMP button.
2
A221170
or TEMP .
6
DRY Mode (Dehumidifying)
1
3
Fig. 8 —Dry Mode (Dehumidifying)
1. Press the MODE button to select DRY.
2. Set your desired temperature using the TEMP
button.
3. Press the ON/OFF button to start the unit.
NOTE: FAN SPEED cannot be changed in DRY mode.
Heat Mode
Fig. 9 —Heat Mode
1. Press the MODE button to select HEAT mode.
2. Set your desired temperature using the TEMP
button.
3. Press FAN button to select the fan speed: AUTO, LOW, MED,
HIGH.
4. Press the ON/OFF button to start the unit.
NOTE: As outdoor temperature drops, the performance of your
unit's HEAT function may be affected. In such instances, we
recommend using this air conditioner in conjunction with
other heating appliances.
Fan Mode
1. Press the MODE button to select FAN mode.
2. Press FAN button to select the fan speed: AUTO, LOW, MED,
HIGH.
3. Press the ON/OFF button to start the unit.
NOTE: You cannot set temperature in FAN mode. As a result, your
remote control's LCD screen will not display temperature.
2
A221172
or TEMP
A221174
or TEMP
A221173