Siemens SCALANCE XM-400 Instructions Manual page 22

3 Engineering VRRP
Start Web Based Management
The SCALANCE device has an integrated HTTP server for Web Based
Management.
To implement Web Based Management, the following conditions must be met:
•
The device has an IP address.
•
There is a connection between the SCALANCE and the engineering PC. You
can use the ping command to check whether the SCALANCE is accessible.
Note
Use the https protocol to establish a secure connection to the SCALANCE.
Proceed as follows to open Web Based Management:
1. In the address bar of the internet browser, enter the IP address of the
SCALANCE, for example the address
If a connection to the device is established with no errors, the login page will
appear.
2. When you log in for the first time or after a "Reset to factory settings and
restart", enter the factory default user "admin" and password "admin".
3. Then click the "Login" button or confirm by pressing "Enter".
VRRP
Entry-ID: 109798556, V1.0, 09/2021
https://192.168.1.2 for the VRRP master.
22