Siemens SCALANCE XM-400 Instructions Manual page 19

3 Engineering VRRP
Assigning the IP address
The first assignment of an IP address for the SCALANCE cannot be done with
Web Based Management, because this configuration tool requires an IP address in
the first place.
There are several ways to assign an IP address to an unconfigured device:
•
SINEC PNI
•
PRONETA
•
STEP 7
•
DHCP
SINEC PNI
Industry Online Support.
Assign the planned IP address to the two SCALANCE routers with one of the
aforementioned tools:
Table 3-2
Device
SCALANCE XM408-8C
SCALANCE XM408-8C
Note VRRPv3 supports IPv4 and IPv6. Both can be configured and operated
simultaneously with VRRPv3.
The following figures describe configuration with SINEC PNI.
1. Click "Start network scan".
2. Select the device found.
3. Click the "Device Management" button.
VRRP
Entry-ID: 109798556, V1.0,
and PRONETA are available to you for free as downloads in the
Function
VRRP master
VRRP backup
09/2021
IP address Subnet mask
192.168.1.2 255.255.255.0
192.168.1.3 255.255.255.0
19