Leb Electronics TINY Manual
  1. Manuals
  2. Brands
  3. Leb Electronics Manuals
  4. Gate Opener
  5. TINY
  6. Manual

Leb Electronics TINY Manual

Electromechanical operator for wing gates
Hide thumbs
1
2
3
4
5
6
7
8
Table of Contents

Advertisement

Quick Links

Download this manual
 
 
TINY 
 
Electromechanical operator for wing gates 
 
 
 
 
 
 
 
 
 CE 
 

Advertisement

Table of Contents
loading

Related Manuals for Leb Electronics TINY

Summary of Contents for Leb Electronics TINY

  • Page 1     TINY    Electromechanical operator for wing gates                   CE   ...
  • Page 2 ENGLISH ENGLISH Warnings - This manual is intended but for qualified technical staff and not for end user. It is a task of the installer to inform afterwards user on the use of the automatism and on possible dangers could come from it, as well as on the need of a periodical maintenance.

  • Page 3: Technical Features

    ENGLISH TECHNICAL FEATURES TECHNICAL DATA TINY 230 TINY 24 Power supply voltage 230 Vac - 50 Hz 24 Vdc Current absorption max. 0,6 A Electric power max. 140 VA 70 W Capacitor 4 uF Maximum stem run 400 mm 400 mm...
  • Page 4 ENGLISH SET UP Previous checks Before proceeding with set up of TINY, check the following points: - Make sure the device works within its employ limits obtainable from the following table: WING 2 mt 2,5 mt 3 mt 3,5 mt...
  • Page 5 ENGLISH “C” - Before fastening the stirrups check the dimension on the support frame is not more than the value reported in the assembling table. In the following assembling table are reported the reference dimensions for the set up of the actuator. OPENING A (mm) B (mm)
  • Page 6 ENGLISH Positioning of back stirrup - Fix the fastening position of the back stirrup by respecting the “A” “B” dimensions reported on the assembling table. - Fasten the stirrup through fitted screw anchors (if the pillar is a masonry) or welding it (if the pillar is iron made). - Check the stirrup is lined up and parallel to the ground.

  • Page 7: Electric Connections

    ITALIANO ENGLISH - Put the hexagonal key into the lock and rotate it clockwise of 180°; now the wing is released and can be manually moved (fig. 1). - To hook again the wing, put the key into and rotate it counterclockwise of 180°.

  • Page 8: Power Supply Cable

    Power supply cable - From the actuator comes out a power supply cable with four wires (230Vac - TINY 230) or two wires (24Vdc - TINY 24). - In the following table the data concerning the power supply cable, required for the connection to the control switchboard, are reported.

This manual is also suitable for:

Tiny 230Tiny 24

Table of Contents