GKD 2-TH Series User Manual
  1. Manuals
  2. Brands
  3. GKD Manuals
  4. Measuring Instruments
  5. 2-TH Series
  6. User manual

GKD 2-TH Series User Manual

Hide thumbs Also See for 2-TH Series:
Table of Contents

Advertisement

Quick Links

Download this manual
USER MANUAL
M2000020 V1.1 - 06/2021

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 2-TH Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for GKD 2-TH Series

Summary of Contents for GKD 2-TH Series

  • Page 1 USER MANUAL M2000020 V1.1 - 06/2021...
  • Page 2 www.gkdtechnologies.com M2000022 V1.1 - 05/2021...

  • Page 3: Table Of Contents

    Contents Page SERIES 2-TH INTRODUCTION SYSTEM HARDWARE KEY SWITCH POSITIONS SETTING A HEIGHT LIMIT BY CAPTURING THE MACHINE POSITION SETTING A HEIGHT LIMIT BY MANUALLY ENTERING THE HEIGHT OPERATIONAL MODE OVERRIDE AT A LIMIT TRAVEL ENABLE WARNING MESSAGES DISPLAY SETTINGS www.gkdtechnologies.com M2000022 V1.1 - 06/2021...

  • Page 4: Series 2-Th Introduction

    The system will then When the system powers up, and displays the GKD logo, press the OK warn when the machine is close to a limit and then prevent the limit from button to enter the operational mode.

  • Page 5: Key Switch Positions

    KEY SWITCH POSITIONS Service Menu or Calibration Mode Turn the key switch to the right position to access Override, Set Limits Operational and Service Area. Turn the key switch to the straight position. From this menu, Height limits can be set and/or adjusted. Also, the This puts the system into the Operational Mode.

  • Page 6: Setting A Height Limit By Manually Entering The Height

    SETTING A HEIGHT LIMIT BY MANUALLY ENTERING THE OPERATIONAL MODE HEIGHT When Series 2-TH r is activated the following screen will appear. Turn the Key Switch to the Set Limits position and select the Set Height The left hand side of the screen shows the Tele Extension length (in Limit option.

  • Page 7: Override

    OVERRIDE restricted zone, the system activates ‘Dead man’ feature, i.e. the main relay supplying the hydraulic valve turns The slew and height limits in this mode are overridden, so the operator off. The warning message will appear on the screen. Rectify the error by can rotate and lift the arm freely without any restriction.

  • Page 8: Warning Messages

    WARNING MESSAGES Power Off If the arm exceeds the pre-set distance from the limit towards to the During the system configuration and the normal operation process the restricted zone, the system activates ‘Dead man’ feature, i.e. the main Sensor slew system calculates and evaluates all the conditions. In any relay supplying the hydraulic valve turns off.

  • Page 9: Display Settings

    DISPLAY SETTINGS The correspondent screen will appear. From the Start up initial screen press the Display Settings push button. Brightness The Display Setup screen will appear. Select the Brightness option by using the up and down arrows and the OK push button. The correspondent screen will appear.
  • Page 10 GKD Technologies reserve the right to change these instructions in line with the policy of continuous improvement. 17 Cobham Road, Ferndown Industrial Estate, Wimborne, Dorset, UK. BH21 7PE +44 (0)1202 861 961 sales@gkdtechnologies.com www.gkdtechnologies.com...

Table of Contents