Clarion MAX983HD Owner's Manual page 17

Manipulating the Map Screen
"Left Map Heading":
Changes the orientation of the left map. This
control is available when the divided map screen
is displayed.
• [Heading Up]
The map is displayed with the travelling
direction pointing up.
• [North Up]
The map is displayed with north pointing up.
"3D Map Angle":
Changes the angle of the 3D map. This control is
available when the 3D map is displayed.
• [Adjust]
The angle control keys are displayed. You can
raise the angle by touching the [E] key, and
lower the angle by touching the [e] key.
"Speed Limit Icon":
Changes the function of the Speed Limit icon.
• [ ]
The icon blinks and a beep sounds when the
speed limit information in the map database is
changed.
• [ ]
The icon blinks when the speed limit information
in the map database is changed.
• [OFF]
This function is disabled.
[Hide Map] key:
Hides the map, and displays the screen
containing only the next guidance point (Turn-by-
Turn screen). This screen can also be displayed
by keep pressing the [MAP] button. When the
navigation system is not in the route guidance
mode, the screen with the compass showing the
direction is displayed.
Cautions
CAUTION
• The actual speed limit may change due to
hours or other circumstances. Be sure to
observe the actual traffic circumstances
and regulations at all times while driving.
• When the actual speed exceeds the speed
limit data, the icon blinking and a beep
sounding will not work.
18
MAX983HD