Sound - Sanyo FW50D36F Owner's Manual

Sound

Before you begin:
You must set Location to Home. L p. 30
Otherwise, personalized Picture and Sound settings will not be
memorized after the Unit goes into Standby Mode.
1
Press MENU and use H I to select Sound, then press OK.
Picture Auto sound
Sound Equalizer
Setup Virtual surround sound
Features Auto volume leveling
Language TV speakers
USB Digital output format
Primary MTS
Digital audio preferences
2
Use H I J K to Select the item you want to adjust, then press OK.
to select the desired setting, then press OK.
(Personal, Standard, Vivid, Sports, Movie,
Music or News)
Auto sound
When you adjust the following settings
(Equalizer, Virtual surround sound or Auto
volume leveling), Personal sound will be set
Automatically.
Adjust the tonal quality for each frequency.
Cursor I
Equalizer
to adjust each level of tonal quality.
Press BACK to go back to the previous menu.
Virtual Surround Sound gives you the Stereophonic virtual space through
your existing 2-channel Stereo System.
Off
Virtual surround
sound
On
This function keeps a constant loudness level between the TV
commercials and the Programs.
Off
Auto volume
leveling
On
You can select the Audio Output from the Unit's speakers or not. If your
amplifier is HDMI link function compatible and connected by an HDMI
cable to this Unit, some sound operations such as volume up can be
changed by using this Unit's Remote Control.
On
Off
TV speakers
CEC Link
Standard
On
Off
On
Multichannel
Stereo
Cursor H
Natural Effect
Emphasized Effect
to Remove the Auto volume
leveling
to Reduce Volume Differences
between the TV Commercials and
the Programs
to Output Sound from the Unit's
Speakers
No Output Sound from the Unit's
Speakers
to Control Audio Output from your
connected HDMI-CEC Compliant
Devices with VOL + / – by using
this Unit's Remote Control.
You can select Audio Output through a Digital Audio Output connector.
Multichannel
Digital output
format
PCM
You can set the Output mode as a default for the Sound mode (Analog
TV only).
This setting is not interlocked when you change the Output mode by
pressing SAP. Refer to Switching Audio Mode. L p. 17
Stereo
Primary MTS Mono
SAP
You can set the interpretive broadcasting by an audio explanation.
Accessibility
Digital audio
Audio
preferences
language
Primary
audio
selection
criteria
22
to Output Multichannel Signals
(When the Audio of the Content is
PCM, it will be Output in PCM even
if Multichannel is selected.)
to Output PCM format
to Output Stereo Audio
to Output Mono Audio
to Output Second Audio Program
to prioritize VI-Visually Impaired
Streaming or HI-Hearing Impaired
Streaming: The setting for
Handicapped users (Main audio,
Visually Impaired or Hearing
Impaired).
to set your Preferred language in
the Audio Streaming (English,
Spanish or French).
to set TV Priority based on either of
the above Settings: (Accessibility
or Audio language).
Continued on next page.
.
English