Sanyo FW50D36F Owner's Manual page 25

Cable / NTSC (Analog) TV Operation
CC-1 and T-1
Caption service
CC-3 and T-3
CC-2, CC-4,
T-2 and T-4
There are 3 Display modes according to Programs:
●
Displays Characters on the TV screen
Paint-on
immediately.
Once Characters are Stored in Memory, they are
Pop-on
Displayed All at Once.
Displays the Characters Continuously by Scrolling
Roll-up
(max. 4 lines).
You can choose the Font (Size, Color, etc), Background and other
Characteristics of the Closed Captions Text.
Font
Caption style
Background
Edge
Picture display
So, you must be Philip. Hi! So, you must be Philip. Hi! So, you must be Philip. Hi!
I'm pleased to meet you. I'm pleased to meet you. I'm pleased to meet you.
Font
(Font style, Font size, Font color and Font opacity)
Edge
(Edge color and Edge type)
Background
(Background color and Background opacity)
Review your setting choice made above by looking in the upper right
●
corner of the displayed setting box (not All selections show the
differences selected).
The primary Closed Captions and
Text Services. The Closed
Captions or Text is Displayed in the
same Language as the Program's
Dialog (up to 4 lines of script on the
TV Screen).
Serve as the preferred Data
Channels. The Closed Captions or
Text is often a Secondary
Language.
Rarely available and Broadcasters
use them only in Special
conditions, such as when CC-1 and
CC-3 or T-1 and T-3 are Not
available.
Font style
Closed Captioning
Font size
font style, size, color
and transparency
Font color
(opacity) can be
Font
changed.
opacity
Background color
Background
and transparency
color
(opacity) of the
Background
displayed caption
opacity
can be switched.
Edge color Edge color and type
of the displayed
caption can be
Edge type
switched.
Note(s)
Closed Caption will NOT be displayed when you are using an HDMI Connection.
●
Digital caption service that you can switch differs depending on the broadcast format.
●
Caption style will not have any effect if the User setting is set to Off.
●
Closed Captions Service may not be controlled by this Unit's Menu options if you are watching
●
television through a Set-top Box. In which case you will need to use the Menu options on the
External Set-top Box to control Closed Captions.
The Captions do not always use correct Spelling and Grammar.
●
Not all TV Programs and product Commercials include Closed Captions information. Refer
to your area TV Program Listings for the TV Channels and times of Closed Captions shows.
The Closed Captions Programs are usually noted in the TV Listings with a Service Mark such
as CC.
Not all Closed Captions Services are used by a TV Broadcaster during the Transmission of
●
a Closed Caption Program.
To show the Closed Caption on your TV screen, Broadcast signal must contain the Closed
●
Caption data.
Captions and texts may not exactly match the TV voice.
●
Changing channels may delay the Closed Caption for a few seconds.
●
Adjusting or muting the volume may delay the Closed Caption for a few seconds.
●
Abbreviations, symbols and other grammatical shortcuts may be used in order to keep pace
●
with the on-screen action. This is not a malfunction.
The caption or text characters will not be displayed while the main menu or functions display
●
is shown.
If a black box appears on the TV screen, this means that the Closed Caption is set to the text
●
mode. To clear the box, select CC-1, CC-2, CC-3, or CC-4.
Refer to Caption settings L p. 24
If the Unit receives poor quality television signals (mainly when the Analog (NTSC) is
●
received), the captions may contain Errors or there might be no captions at all. Some possible
causes of poor quality signals are:
Automobile ignition noise
–
Electric motor noise
–
Weak signal reception
–
Multiplex signal reception (ghosts or screen flutter)
–
Data dropout and Pixelation (for DTV only)
–
The Unit retains the Closed Caption setting if the Power fails.
●
When the Unit receives special effects Playback signal (e.g. Search, Slow and Still) from a
●
VCR's Video Output channel (ch3 or ch4), the Unit may not display the correct caption or
text.
The EUT (Equipment Under Test) setting that satisfies
●
§ 79.102 (e) is as follows:
Font: Mono-font
–
Character Size: Large
–
25 .
English
Continued on next page.