Table of Contents
Advertisement
Sound
Before you begin:
You must set Home in Location. L p. 32
Otherwise, personalized picture and sound settings will not be
memorized after the unit goes into standby mode.
1
Press Z and use J K to select Setup then press OK.
2
Use H I J K to select TV settings, then press OK.
3
Use H I to select Sound, then press OK.
Auto sound
Picture
Equalizer
Sound
Features
Balance
Virtual surround sound
Installation
Auto volume leveling
Accessibility
TV speakers
Headphone volume
Digital output format
Delta volume
4
Use H I J K to select the item you want to adjust, then press OK.
The following sound settings can be configured. Depending on the
format of the broadcasting, some sound settings are not available.
To set your TV to a predefined sound setting.
When you adjust the following settings (Equalizer,
Virtual surround sound and Auto volume
leveling), Personal sound will be set automatically.
Personal
Standard
Auto sound
Vivid
Sports
Movie
Music
News
Adjust the tonal quality for each frequency.
Cursor H
Equalizer
To adjust each level of tonal quality
Press BACK to go back to the previous menu.
Adjust the speakers to suit your listening preference.
Cursor H
Balance
To adjust the balance of the right and left
speakers
The customized settings you
defined using the Sound menu.
For normal TV viewing.
Enhanced sound.
Clear sound for high action.
Powerful sound settings for a
cinematic experience.
Optimized for music playback.
Set the anchor's voice at a
comfortable volume.
Cursor I
Cursor I
Virtual surround sound gives you the stereophonic virtual space through
your existing 2-channel stereo system.
Off
Virtual surround
sound
On
This function keeps a constant Loudness differential between the TV
commercials and the programs.
Off
Auto volume
leveling
On
You can select the audio output from the unit's speakers or not. If your
amplifier is HDMI link function compatible and connected by an HDMI
cable to this unit, some sound operations such as volume up can be
changed by using this unit's remote control. Make sure fun-Link control
is set to On. L p. 32
Off
On
TV speakers
Speakers
fun-link
Adjust headphone volume.
Cursor H
Headphone
volume
To decrease or increase volume
You can set the digital audio output format from SPDIF/ARC.
PCM
Digital output
format
Bitstream
If a channel or input device is too loud or too soft, navigate to that channel
or input device.
Cursor H
Provides the ability to set a custom volume level
for the current channel or input source.
Delta volume
If the source volume is too loud, set a negative
value (-1 to -12)
If the source volume is too soft, set a positive
value (+1 to +12)
30
Natural effect
Emphasized effect
To remove the Auto volume
leveling
To reduce volume differences
between the TV commercials and
the programs
No output sound from the unit's
speakers
To output sound from the unit's
speakers
To control audio output from your
connected HDMI-CEC compliant
devices with VOL + / – by using this
unit's remote control.
Cursor I
To output PCM format
To output audio in its native format
as Bitstream to connected audio
receiver
Cursor I
Continued on next page.
.
English
Advertisement
Table of Contents
