Front; Side - Insignia NS32DR310NA17OM User Manual

Insignia 55" LED-LCD TV, 1080p

Front

Note
To turn on your TV using the
your TV, press
five to seven seconds of each other. The first time you
press , the button labels appear on the screen. The
second time you press
# Item Description
1
Remote control sensor Receives signals from the remote control. Do not block.
Turns off when your TV is turned on.
2 Lights red when your TV is in standby mode.
Power indicator
Turns off when the power cord is unplugged.
3
MENU Press to open the on-screen menu.
4
INPUT Press to select the video input source.
5
VOL Press to increase the volume.
6
VOL Press to decrease the volume.
7
CH Press to go to the next channel in the channel list.
8
CH Press to go to the previous channel in the channel list.
Press to turn on your TV. Press again to put your TV in
standby mode.
9
When your TV is in standby mode, power still flows
(power)
through it. To completely disconnect power, unplug
the power cord.
(power) button on
twice. The presses must be within
, your TV turns on.
www.insigniaproducts.com

Side

# Item Description
Connect headphones to this jack. For more
1 information, see "Connecting headphones" on
HEADPHONE
page 12.
Connect an antenna, cable TV, or satellite TV box to
2 this jack. For more information, see "Connecting an
ANT/CABLE IN
antenna or cable TV without a cable box" on page 9.
Connect an analog sound system to these jacks to send
the TV audio through the sound system. For more
3
AUDIO OUT L/R OUT
information, see "Connecting an analog (stereo)
sound system" on page 13.
Connect the video for a computer to the PC VGA jack.
Connect the audio for a computer or DVI device to the
PC VGA and PC/DVI
4
PC/DVI AUDIO IN jack. For more information, see
AUDIO IN
"Connecting a computer" on page 12.
Connect HDMI devices to these jacks. An HDMI cable
carries both video and sound. You do not need to make
an audio connection for an HDMI device.
5
HDMI1/HDMI2/HDMI3
For more information, see "Connecting an HDMI
device" on page 10.
5