Assembly; Operation - Husqvarna Aspire H50-P4A Operator's Manual

Hide thumbs Also See for Aspire H50-P4A:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
conditions that can possibly injure or kill, we
recommend persons with medical implants
to speak with their physician and the medical
implant manufacturer before you operate the
product.
WARNING:
parts can be easily swallowed. There is
also a risk that the polybag can suffocate
toddlers. Keep toddlers away when you
assemble the product.
Safety instructions for maintenance
WARNING:
instructions that follow before you do
maintenance on the product.
Remove the battery before you do maintenance,
other checks or assemble the product.
Introduction
This section describes how to assemble and adjust the
product.
WARNING:
product, read the safety chapter and the
assembly instructions.
To install the hook on the wall
Install the hook indoors.
Keep the hook out of sunlight and in ambient
temperature of -10°C to 70°C.
Install the hook on a drywall, wood or concrete wall.
Introduction
WARNING:
safety chapter before you use the product.
Battery
WARNING:
you must read and understand the safety
chapter. You must also read and understand
the operator's manual for the battery and the
battery charger.
Keep the battery and the battery charger in correct
ambient temperatures.
1888 - 002 - 12.07.2022
Risk of suffocation! Small
Read the warning

Assembly

Before you assemble the

Operation

Read and understand the
Before you use the battery,
The operator must only do the maintenance and
servicing shown in this operator's manual. Turn to
your servicing dealer for maintenance and servicing
of a larger extension.
Do not clean the battery or the battery charger with
water. Strong detergent can cause damage to the
plastic.
If you do not do maintenance, it decreases the
life cycle of the product and increases the risk of
accidents.
Special training is necessary for all servicing and
repair work, especially for the safety devices on the
product. If not all checks in this operator's manual
are approved after you have done maintenance, turn
to your servicing dealer. We guarantee that there are
professional repairs and servicing available for your
product.
Only use original spare parts.
CAUTION:
can hold loads of minimum 30 kg.
Install the hook on the wall with the 3 screws (A).
Use wall plugs (B) if it is necessary. (Fig. 28)
CAUTION:
screws are applicable for your wall type.
Speak to your Husqvarna service agent for
information about available storage accessories for
your product.
Operation of the bat-
tery in the product
Charging of the bat-
tery
To connect the battery charger
1. Connect the battery charger to the voltage and
frequency that is specified on the rating plate.
2. Put the plug in a grounded socket outlet. The LED
on the battery charger flashes green one time.
Make sure that the wall
Make sure that the
Ambient temperature
-20 °C – 50 °C
0 °C – 35 °C
13

Advertisement

Table of Contents
loading

Table of Contents